PCM Diagnostics & Tuning HP Tuners | Holley | Diablo
Sponsored by:
Sponsored by:

P0171

Thread Tools
 
Search this Thread
 
Old 02-25-2008, 09:21 PM
  #1  
TECH Resident
Thread Starter
iTrader: (6)
 
A-Dub's Avatar
 
Join Date: Nov 2004
Location: Houston, TX
Posts: 835
Likes: 0
Received 1 Like on 1 Post

Default P0171

Car is an 03 z06. Headers, vararam, underdrive pulley, and F11 cam. Professionally tuned by a local performance shop. Current issues are P0171 code. O2 sensors have under 1000 miles on them and code showed up before they had 100 miles on them. Both are new.

Tune and scan attached. Obviously you can see the LTFTs are nuts, but what could be causing that reading? If you look at the tune, you can see that the tuner did not modify any of the part throttle fueling. Thats what I am blaming it on. What do you guys think?
Attached Files
File Type: hpt
o2ontune.hpt (460.0 KB, 346 views)
File Type: hpl
derrellhighltft.hpl (238.4 KB, 39 views)

Last edited by A-Dub; 02-25-2008 at 09:33 PM.
Old 02-25-2008, 10:24 PM
  #2  
TECH Senior Member
iTrader: (25)
 
2xLS1's Avatar
 
Join Date: Nov 2001
Location: Warr Acres, OK
Posts: 5,649
Likes: 0
Received 8 Likes on 8 Posts

Default

I attempted to tune a 02 TA today that had +25% fuel trims. Turned out the fuel pressure at the rail was only 40 psi. Don't always blame the tuner.
Old 02-26-2008, 07:40 AM
  #3  
TECH Resident
Thread Starter
iTrader: (6)
 
A-Dub's Avatar
 
Join Date: Nov 2004
Location: Houston, TX
Posts: 835
Likes: 0
Received 1 Like on 1 Post

Default

Yea, that would have been something easy to check.
Old 02-26-2008, 08:50 PM
  #4  
TECH Resident
Thread Starter
iTrader: (6)
 
A-Dub's Avatar
 
Join Date: Nov 2004
Location: Houston, TX
Posts: 835
Likes: 0
Received 1 Like on 1 Post

Default

bump....
Old 02-27-2008, 02:24 PM
  #5  
Teching In
iTrader: (1)
 
06GMC4X4's Avatar
 
Join Date: Mar 2007
Location: Midland, TX
Posts: 47
Likes: 0
Received 0 Likes on 0 Posts
Default

My car was throwing the same code, ended up being exhaust leaks.
Old 02-27-2008, 02:36 PM
  #6  
TECH Enthusiast
 
sprayjunkie's Avatar
 
Join Date: Jul 2006
Location: sofla
Posts: 747
Likes: 0
Received 0 Likes on 0 Posts
Default

Clear it and see if it comes back...for some reason I have seen Vettes throw this code once after being tuned, and after clearing it, it never comes back...
Old 02-28-2008, 10:10 AM
  #7  
TECH Resident
Thread Starter
iTrader: (6)
 
A-Dub's Avatar
 
Join Date: Nov 2004
Location: Houston, TX
Posts: 835
Likes: 0
Received 1 Like on 1 Post

Default

Cleared it, came back after 3 driving cycles. It has fresh GM MLS gaskets up top and blocked off AIR fittings. I'm going to have him check for bad welds at the collector




All times are GMT -5. The time now is 04:53 PM.