need help finding fuel lines
#1
Staging Lane
Thread Starter
Join Date: Feb 2014
Location: Florida
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
need help finding fuel lines
I am looking for braided, steel fuel lines for my 96 firebird ws6. Does anybody know where I can buy aeromotive or edelbrock lines? Thank you
#3
Staging Lane
Thread Starter
Join Date: Feb 2014
Location: Florida
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
I am putting in an aeromotive 700 hp adustable fuel pump and an aeromotive fuel regulator rated for 30-70 ps1, I have also installed 35 lbs/hr fuel high impedance fuel injectors. I need to replace the entire stock fuel lines. So the new lines need to go from the pump to the where the stock lines hook up. I haven't yet measured exactly how much I will need yet.
#4
That's MISTER MODERATOR
iTrader: (9)
I suggest you run AN style hose and fittings. The braided covered hose is heavy and will wear against anything it rubs against. The cloth covered hose may get chaffed if it rubs against stuff so use it so sleeve the run in convoluted split-loom wiring tubing.
The AN hose & fittings companies make snap-on adapters for OEM fuel lines that you can use at the fuel rail end.
The AN hose & fittings companies make snap-on adapters for OEM fuel lines that you can use at the fuel rail end.
#6
Sorry to thread jack but would there be any benefit in running braided lines from just the pump module to the hard lines? And if so is there a kit out there that has all the lines already cut to lenght? TIA