tranny problems
#1
Registered User
Thread Starter
Join Date: Jul 2009
Location: brazil
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
tranny problems
I had just recently lost 5th 6th and reverse and so i decided to tear the tranny apart and this is what i found.
Some how i ripped the teeth off of the cluster shaft where it joins with 5th 6th and reverse inside the tranny.
Thats about all that i have noiced wrong inside the tranny so far.
Any body know the difference with the F-body T56 and the GTO T56 other then gearing?
Some how i ripped the teeth off of the cluster shaft where it joins with 5th 6th and reverse inside the tranny.
Thats about all that i have noiced wrong inside the tranny so far.
Any body know the difference with the F-body T56 and the GTO T56 other then gearing?
#2
12 Second Club
Were you grinding gears previous to losing 5th and 6th?????? How long have you had it and how many miles??? As for the Fbody T56 and the GTO T56 besides the gearing they are generally the same....
#3
On The Tree
iTrader: (3)
Join Date: Dec 2004
Location: Pittsburgh, PA
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
seriously, man, if you're going to rebuild it, the blocker ring setup is the same as the Corvette, hence the greater expense when you do the rebuild.
#4
Registered User
Thread Starter
Join Date: Jul 2009
Location: brazil
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
i have had it for about 4 months, it has 62k miles. it has had several other owners. about a month after i got it it started to grind into first and second.
#6
Registered User
Thread Starter
Join Date: Jul 2009
Location: brazil
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
i know that the fbody t56 isnt as hefty of a trans. but it would bolt up the same wouldnt it? there isnt really a visual difference that i can tell but i dont know much about transmissions.