Track Results, 1st time with new goat
#1
Teching In
Thread Starter
Join Date: Feb 2004
Location: Apopka, FL
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Track Results, 1st time with new goat
I made it to the track Wednesday night for the first time since I got the GTO. It is still basically stock except for a K&N panel filter and some minor TM adjustments (raised shift points, rev limiter etc.)
She ran three 13.6's each at 102.something. I was pretty pleased but I can't wait to get the torque converter installed. Headers, cam, and possibly heads are on my list then we'll see what she can do.
BTW, in run number one, I beat a Mach 1 (stock) by about the same margin as in the magazine story, one 10th or so. I'll look for some cobras after the other work is done!
Dave
She ran three 13.6's each at 102.something. I was pretty pleased but I can't wait to get the torque converter installed. Headers, cam, and possibly heads are on my list then we'll see what she can do.
BTW, in run number one, I beat a Mach 1 (stock) by about the same margin as in the magazine story, one 10th or so. I'll look for some cobras after the other work is done!
Dave
#4
Teching In
Thread Starter
Join Date: Feb 2004
Location: Apopka, FL
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
No, I had a GTP. I got it up to around 320 Fwhp and ran a 13.2 at 105. Of course my first goal is to get the GTO faster than that.
It's sad/funny that I'll be able to that with only a few mods compared to the long list and associated costs I had to do to the GTP to achieve that time.
It's sad/funny that I'll be able to that with only a few mods compared to the long list and associated costs I had to do to the GTP to achieve that time.
#6
TECH Enthusiast
Join Date: Jun 2002
Location: In the garage fixing LT1
Posts: 634
Likes: 0
Received 0 Likes
on
0 Posts
Excellent runs. Why haven't we heard from the M6 owners. Looks like they'll be running low 13s easy stock. Looks like it's gonna be faster than people thought.
Trending Topics
#11
Teching In
Thread Starter
Join Date: Feb 2004
Location: Apopka, FL
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 99-LS1-SS
Good times! What do the GTO's weigh? They do make a manual don't they?
#16
I'm curious. I've gotten on my car just a couple of times thus far and each time I recieve a loud clunk from the rear of the car during the 1:2 shift. Do you have anything similar on your car?
Originally Posted by Wavydavy Black GTO
I made it to the track Wednesday night for the first time since I got the GTO. It is still basically stock except for a K&N panel filter and some minor TM adjustments (raised shift points, rev limiter etc.)
Dave
Dave
#17
9 Second Club
iTrader: (14)
Originally Posted by darkitec
I'm curious. I've gotten on my car just a couple of times thus far and each time I recieve a loud clunk from the rear of the car during the 1:2 shift. Do you have anything similar on your car?
I noticed that "clunk" also on the M6 Goat that I test drove. WTF is it??
#18
TECH Veteran
Join Date: Feb 2004
Location: Phoenix, AZ Hometown: Aberdeen, SD
Posts: 4,231
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by GTA91
I noticed that "clunk" also on the M6 Goat that I test drove. WTF is it??
#19
Teching In
Join Date: Mar 2004
Location: Behtlehem, GA
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Wavydavy Black GTO
I made it to the track Wednesday night for the first time since I got the GTO. It is still basically stock except for a K&N panel filter and some minor TM adjustments (raised shift points, rev limiter etc.)
She ran three 13.6's each at 102.something. I was pretty pleased but I can't wait to get the torque converter installed. Headers, cam, and possibly heads are on my list then we'll see what she can do.
BTW, in run number one, I beat a Mach 1 (stock) by about the same margin as in the magazine story, one 10th or so. I'll look for some cobras after the other work is done!
Dave
She ran three 13.6's each at 102.something. I was pretty pleased but I can't wait to get the torque converter installed. Headers, cam, and possibly heads are on my list then we'll see what she can do.
BTW, in run number one, I beat a Mach 1 (stock) by about the same margin as in the magazine story, one 10th or so. I'll look for some cobras after the other work is done!
Dave
When I first ran my Mach1 at Reynolds last September I was shocked at the results.
E/T 13.216
Trap 106.2
60Ft 1.90
R/T .550