bucklwi1

I took my stock 2004 M6 GTO to get dynoed today to establish a baseline. I was hoping to hit 300 RWHP and came up just a bit short.

My best numbers were 299.9 RWHP and 319.2 ft/lbs (not in the same run)

On the same dyno my 2001 Z28 A4 only put down 278 RWHP when stock, so I was happy with these numbers.

how do I post the graph so that the picture actually appears in this post?

I'll try this...


http://i2.photobucket.com/albums/y15...dyno4-9-05.jpg

'Trust'

iTrader: (24)

here

CMNTMXR57

It looks like you were a tad rich on some of the pulls and the others look to be right on the money.

gametech

iTrader: (1)

My factory gto pe was set rich enough for an fi car. As a matter of fact, I Used the stock PE tables for my turbo tune. However, I gained a nice sotp improvement na when I leaned out the factory PE.

LS2 Pontiac GTO

Nice numbers. Just curious what did your Z28 put down in torque?

Solobarictahoe

wait till you get more miles on it you will see a little more power

bucklwi1

the Z28 had 317 torque when stock

gtodoug

iTrader: (1)

Nice power, on par or a little above for an 04 M6