Very Nice 1968 Firebird Project Car FS/FT (LOTS OF PICS!)

 
Thread Tools
 
Search this Thread
 
Old Jul 21, 2008 | 12:05 AM
  #1  
97ramsst's Avatar
Thread Starter
TECH Addict
iTrader: (162)
 
Joined: Jul 2007
Posts: 2,488
Likes: 6
From: Athens, Alabama
Default Very Nice 1968 Firebird Project Car FS/FT (LOTS OF PICS!)

Ok I had a lot of intrest in the 68 Firebird I mentioned in another thread. So here it is on its own....its a 68 Firebird that originaly had a 350HO/auto in it but now it doenst have a motor or trans in it (I had planned to solve that with a LSx conversion!) The body is in GREAT shape with only minor rust in a few spots....way way better than most! The only dent in it is in the drivers side fender. The interior is all there for the most part as well. I have to take it out and clean it up and get pictures of it and the floor boards...but they are very solid. The car had set in a farmers shed in Plains GA from 1991 until last month when I found it. Its a southern car with very very little rust and would be an oustanding restoration project for someone!

I am asking $3K OBO for the car...I have no idea how much its worth and really dont want to put it on ebay so if you have something to trade or want to make an offer the worste I can do is laugh in your face (JK...maybe!)

Its located in Albany, GA. I can deliver it for the right deal.

I also have a Corvette, a Jeep and a Formula up for trade, I would be willing to swap all for one or whatever we can work out....lets just do some trading! Link to the other cars:
https://ls1tech.com/forums/vehicles-wanted/956138-wtt-89-vette-vert-m6-jeep-68-firebird-nice-ls1-lt1.html































If you want pics of something not shown just ask!
Old Jul 21, 2008 | 05:11 PM
  #2  
572ysc's Avatar
Launching!
 
Joined: Mar 2005
Posts: 237
Likes: 0
From: Lima, Ohio
Default

I might be intereted in the car.
Do you have an e-mail adress? Pics of the trunk, interior and engine bay would be awsome. I is the paint original? Also maybe underneath.

Thanks,
Ben
Old Jul 21, 2008 | 06:05 PM
  #3  
Patrick G's Avatar
LS1 Tech Administrator
20 Year Member
Photogenic
iTrader: (14)
 
Joined: Nov 2001
Posts: 8,246
Likes: 34
From: Victoria, TX
Default

Nice car for the price. I'm interested as well. Interior pics please.
__________________

2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2022 Cadillac Escalade 6.2L A10 S&B CAI, Corsa catback.
2023 Corvette 3LT Z51 soon to be modified.
Custom LSX tuning in person or via email press here.

Old Jul 21, 2008 | 06:09 PM
  #4  
BigBlockPwr's Avatar
Teching In
iTrader: (1)
 
Joined: Feb 2007
Posts: 21
Likes: 0
Default

me too. PM On how much to tulsa oklahoma. interior pics please
Old Jul 21, 2008 | 08:10 PM
  #5  
97ramsst's Avatar
Thread Starter
TECH Addict
iTrader: (162)
 
Joined: Jul 2007
Posts: 2,488
Likes: 6
From: Athens, Alabama
Default

Man there is a lot of interest in this car! My email address is ramsst1997@hotmail.com

I would consider delivering it somewhere in the southeast...OK a little too far.

The paint is old but not original.

I will have to get pics of the inside this weekend...its all there as far as I can tell (except the console and of course the carpet) but its not bolted in. The door panels look good and the seats arent bad but if I was going to take time to restore it I would figure it all needs to be replaced anyway.

Also the hood is fiberglass bolt on with stock hinges and hardware...not the original.

Front suspension:




Floor Pan:








Rear suspension:






Engine Bay:










This is a picture of the trunk floor (no gas tank in the car) and shows the only rust through I saw under the car:
Old Jul 21, 2008 | 10:48 PM
  #6  
transamsam98's Avatar
TECH Resident
iTrader: (56)
 
Joined: Oct 2006
Posts: 878
Likes: 1
From: calvert county
Default

is the silver t/a in the back round for sale?
Old Jul 22, 2008 | 07:45 AM
  #7  
02gtp4now's Avatar
TECH Junkie
15 Year Member
iTrader: (7)
 
Joined: Oct 2006
Posts: 3,748
Likes: 0
From: lebanon,mo
Default

man i wish i had the money for this car
Old Jul 22, 2008 | 09:30 AM
  #8  
97ramsst's Avatar
Thread Starter
TECH Addict
iTrader: (162)
 
Joined: Jul 2007
Posts: 2,488
Likes: 6
From: Athens, Alabama
Default

Originally Posted by transamsam98
is the silver t/a in the back round for sale?

No, thats the wifes car.

Last edited by 97ramsst; Jul 22, 2008 at 11:54 AM.
Old Jul 23, 2008 | 08:34 AM
  #9  
97ramsst's Avatar
Thread Starter
TECH Addict
iTrader: (162)
 
Joined: Jul 2007
Posts: 2,488
Likes: 6
From: Athens, Alabama
Default

Ttt...
Old Jul 25, 2008 | 08:15 PM
  #10  
97ramsst's Avatar
Thread Starter
TECH Addict
iTrader: (162)
 
Joined: Jul 2007
Posts: 2,488
Likes: 6
From: Athens, Alabama
Default

Well I thought I had a buyer but he didnt show up this evening...so back TTT!

I am open to reasonable offers, but no low balling!
Old Aug 6, 2008 | 09:24 AM
  #11  
97ramsst's Avatar
Thread Starter
TECH Addict
iTrader: (162)
 
Joined: Jul 2007
Posts: 2,488
Likes: 6
From: Athens, Alabama
Default

Price Drop...$2250
 




All times are GMT -5. The time now is 03:27 PM.