parting out 94 z28
parting out the entire car. the motor and trans has 60k miles. the car has sat for a little over a year. i drove it home from tennessee with no problems. the car has no power options they were removed by the dealer when it was bought new. car is black on black with the clear coat chipping.
left fender $60
right fender $60
nose cone (no cracks or chips, has camaro symbol in great shape) $200
hood $70
hatch with spoiler $80
rear bumper cover $70
driver door complete minus door panel $100
passenger door complete minus door panel $100
motor complete intake to oil pan accessories harness and comp $950
trans $500
rear end $sold
black interior (the hindge on the console lid broke, 1 tear in driver seat, the plastic piece from dash pad to windshield the corner is broke off) $300 for all inerior except seats
air bags
sub frame $200
the shell is in good shape except for 1 crease dent by passenger door $500
driverside tail light $25
t-tops as a pair $100
brake system $make offer
camaro panel between tail lights $40
drive shaft $make offer
trans cross member $make offer
comp cam 503 used for 2 minutes before rod went in my t/a $200
comp cam beehive springs 918 or 915 for ls1 $80
asked about anything i havent listed. prices dont include shipping.
theres a lot more im forgetting. everything is in cumming ,ga
left fender $60
right fender $60
nose cone (no cracks or chips, has camaro symbol in great shape) $200
hood $70
hatch with spoiler $80
rear bumper cover $70
driver door complete minus door panel $100
passenger door complete minus door panel $100
motor complete intake to oil pan accessories harness and comp $950
trans $500
rear end $sold
black interior (the hindge on the console lid broke, 1 tear in driver seat, the plastic piece from dash pad to windshield the corner is broke off) $300 for all inerior except seats
air bags
sub frame $200
the shell is in good shape except for 1 crease dent by passenger door $500
driverside tail light $25
t-tops as a pair $100
brake system $make offer
camaro panel between tail lights $40
drive shaft $make offer
trans cross member $make offer
comp cam 503 used for 2 minutes before rod went in my t/a $200
comp cam beehive springs 918 or 915 for ls1 $80
asked about anything i havent listed. prices dont include shipping.
theres a lot more im forgetting. everything is in cumming ,ga
Last edited by CamaroZ2869C; Feb 19, 2007 at 08:23 PM. Reason: prices
I want to know condition on front bumper cover, and price.
Also I need the power lock retention clips (small metal clips)
I need the 2 bolts that hold down your OBD port.
I need the shifter boot retension ring if this is a manual.
Also I need the power lock retention clips (small metal clips)
I need the 2 bolts that hold down your OBD port.
I need the shifter boot retension ring if this is a manual.
Trending Topics
only driver side tail light is good.
will try to get a pick of the camaro panel later it is in good shape. paint is good and no cracks.
500hpbluez28, lt1camaross asked about it first so i will give him a chance then i will let you know.
sampson which springs springs are you wanting the suspension or one of the 2 sets of comp cam springs
will try to get a pick of the camaro panel later it is in good shape. paint is good and no cracks.
500hpbluez28, lt1camaross asked about it first so i will give him a chance then i will let you know.
sampson which springs springs are you wanting the suspension or one of the 2 sets of comp cam springs


