intake heads shaft rockers valve covers steam vent kit. Complete top end
#1
intake heads shaft rockers valve covers steam vent kit. Complete top end
Category: Engine - Intake/Fuel
Price: $1
Part Fits: 2010+ Camaro, 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette, 04-06 Pontiac GTO, 04+ Cadillac CTS-V, 67-92 Chevrolet Camaro, 67-92 Pontiac Firebird, Front wheel drive vehicles
Location (State): IN
Item Condition: Brand New
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6, LT1/LT4, Small Block, Big Block
LS Engine?: Fits LS Engine
World product warhawk heads
Cnc ported by BES and taken a step further by Mike Stark at CFM. These are fresh from machine shop with a fresh clean up mill and cleaned.
255cc intake runners
63cc combustion chamber
11/32" ferra 2.150 intake valve 1.600 exhaust valve
3 different spring setups available.
-Currently set up with New Manley nextek springs set up for .675-.700 lift hydraulic roller cam with titianium retainers
-New k motion k900 springs set up for .700 lift solid roller cam with Chrome moly retainer
-Used Psi max life springs setup for .750 lift with chromemoly retainers
Jesel j2k Mohawk beam adjustable shaft rocker system 1.7 ratio
Gm performance tall valve covers. Clearanced to clear the shaft rockers.
Mast Motorsports 2 piece single plane intake 4500 Port matched to heads. This is a efi intake, I currently have the injector holes plugged for a carbureted application. These can be removed. Comes with matching mast Motorsports fuel rails to convert it back to efi.
Custom 4 corner steam vent setup
All must be sold together everything is made to fit this particular combination. I have tons of time and money in getting all these components to fit and match properly. All of this will be sold together.
This combination in a 3150 lb Camaro on radials 440ci and .750 lift nitrous cam has Been 5.14 @ 136mph in the 1/8 on a 350 shot of nitrous. This setup has a ton of potential
$2500 for everything minus rockers
$3,000 for all!!
Call or text James
317-752-7406
Last edited by jgillen91; 02-13-2017 at 12:00 PM.