CMB Motorsports CNC Procomp Cathedral Port Heads
#1
CMB Motorsports CNC Procomp Cathedral Port Heads
Category: Engine - Intake/Fuel
Price: $950
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette
Location (State): NC
Item Condition: Used
Engine: LS1/LS6
LS Engine?: Fits LS Engine
The castings look very nice with nice CNC porting as stated below in the original owner's add. The Manley valves and springs are high end and the mileage sated below appears correct.
Just bolt on and go!
Nice set of less than 700 mile CNC LS6 heads from CBM Motorsports. They use Manley one piece stainless 2.055 intake and 1.60 exhaust valves along with Manley polished Nextek dual springs # 221435-16 rated to .660 lift. They have 64cc chambers.
These are the heads on their site with their flow numbers: http://store.custombuiltmotors.com/e...der-heads.html
These are aftermarket castings made by Procomp with the upgraded Manley hardware. They are essentially the same heads as the ones in the 2010 Hotrod that offered the highest peak power but with higher quality valves and springs. http://www.hotrod.com/how-to/engine/...der-head-test/
These were on an LS2 from a 2006 GTO that I am parting out that bent a rod shortly after these were installed.
950 shipped, exactly what I Paid!
Pickup welcome
If paypal either gift or add 3%.
Thanks
Brad
#4
Just to clear up confussion...I am a new member to ls1tech. I'm a longtime member of corvette forum, Buick Turbo 6, ZR1.net. simply put a Corvette person.
Sold lots of part on Ebay as well as high end corvettes, 1st gen camaro's that people such as the nuthugger 98Zheadsncam above could never dream of owning.
If you have any concerns what so ever feel free to PM me and I can provide you with a phone number.
Thanks
John Bradley
Sold lots of part on Ebay as well as high end corvettes, 1st gen camaro's that people such as the nuthugger 98Zheadsncam above could never dream of owning.
If you have any concerns what so ever feel free to PM me and I can provide you with a phone number.
Thanks
John Bradley
#5
Just to clear up confussion...I am a new member to ls1tech. I'm a longtime member of corvette forum, Buick Turbo 6, ZR1.net. simply put a Corvette person.
Sold lots of part on Ebay as well as high end corvettes, 1st gen camaro's that people such as the nuthugger 98Zheadsncam above could never dream of owning.
If you have any concerns what so ever feel free to PM me and I can provide you with a phone number.
Thanks
John Bradley
Sold lots of part on Ebay as well as high end corvettes, 1st gen camaro's that people such as the nuthugger 98Zheadsncam above could never dream of owning.
If you have any concerns what so ever feel free to PM me and I can provide you with a phone number.
Thanks
John Bradley
It's obvious, John is real deal... welcome to the forum sir!
#7
I go by Brad and my paypal and auto responses show as John. I figured that's what the hell you were referring to this morning.
As stated you will never have to worry about me scamming you. Just move right past any post I may have in the future.