FS: New CNC ported 799 (LS2) Heads, Callies Crank, Griffin Radiator, MAST, and MORE!
#1
FS: New CNC ported 799 (LS2) Heads, Callies Crank, Griffin Radiator, MAST, and MORE!
Category: Engine - Intake/Fuel
Price: $2000
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette, 04-06 Pontiac GTO, 04+ Cadillac CTS-V
Location (State): CO
Item Condition: Brand New
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6
LS Engine?: Fits LS Engine
This is for 93-97 LT1 camaros but might fit other models.
couple quick pictures.
looking to get 485shipped OBO
http://www.summitracing.com/parts/gri-6-893ae-gax
Last edited by itsslow98; 01-13-2015 at 12:53 AM.
#2
FS: New 6.125 Callies H-Beam w/ ARP 2000
For Sale New in the box
Callies LS 6.125 Rods with ARP2000 Rod Bolts
CSC6125DS2A2AH
http://www.tickperformance.com/calli...sc6125ds2a2ah/
$530shipped Firm. please don't contact me if you have any other price in mind. I can post pics if you send me your email. but they are brand new so nothing special to see.
might consider trade for a nice set of hydrolic lifters. New only, I don't want used.
Callies LS 6.125 Rods with ARP2000 Rod Bolts
CSC6125DS2A2AH
http://www.tickperformance.com/calli...sc6125ds2a2ah/
$530shipped Firm. please don't contact me if you have any other price in mind. I can post pics if you send me your email. but they are brand new so nothing special to see.
might consider trade for a nice set of hydrolic lifters. New only, I don't want used.
#4
FS: New CNC ported 799 (LS2) Heads
I have for sale New LS2 (799 castings) Heads.
They were CNC ported, milled .006, 5 angle valve job, assembled with New Black nitrided valves (2.055 int/1.600 exh), New BTR .660 lift springs with Ti retainers. The castings were used off a 2013 5.3. but the work, and all the parts are new, never used after being assembled.
I spent about $2325 on those after shipping and everything (including $500 for the used castings). I would like to get $2000shipped. assembled ready to go.
I also have used LS2 heads (243 castings) came off a 2005 GTO with 70k miles. assembled never taken apart or anything. $540shipped.
Thanks
They were CNC ported, milled .006, 5 angle valve job, assembled with New Black nitrided valves (2.055 int/1.600 exh), New BTR .660 lift springs with Ti retainers. The castings were used off a 2013 5.3. but the work, and all the parts are new, never used after being assembled.
I spent about $2325 on those after shipping and everything (including $500 for the used castings). I would like to get $2000shipped. assembled ready to go.
I also have used LS2 heads (243 castings) came off a 2005 GTO with 70k miles. assembled never taken apart or anything. $540shipped.
Thanks
Trending Topics
#12
FS: New F2 Procharger with LSX Bracket
I have for sale Brand New F2 Procharger. I had it for a long time but never used it.
spent over $5000 with the bracket and Cog setup, will sell it for $3950shipped
Bracket Part# AB038A-012
Model: F-2
Max RPM: 65K
Ratio: 5.40
best way to reach me is by email at
walhan_qtr@msn.com
thanks
spent over $5000 with the bracket and Cog setup, will sell it for $3950shipped
Bracket Part# AB038A-012
Model: F-2
Max RPM: 65K
Ratio: 5.40
best way to reach me is by email at
walhan_qtr@msn.com
thanks
Last edited by walhan_qtr; 12-25-2014 at 03:50 PM.
#13
FS: New LSX-DR Heads and Intake
Brand new in the original box a set of LSX-DR CNC ported DR-Heads. Bare just like the link below
http://www.jegs.com/i/Chevrolet+Perf...3hYxoCxxjw_wcB
as you can see they sell for 1666 each (so $3332 Pair) I will let those go for $2900shipped
I also have New GM LSX DR-Intake to go with those heads
http://www.jegs.com/i/Chevrolet-Perf...57851/10002/-1
looking to get $400shipped for the intake
buy both for $3150shipped!!!!!
best way to reach me is by email walhan_qtr@msn.com
Thanks
http://www.jegs.com/i/Chevrolet+Perf...3hYxoCxxjw_wcB
as you can see they sell for 1666 each (so $3332 Pair) I will let those go for $2900shipped
I also have New GM LSX DR-Intake to go with those heads
http://www.jegs.com/i/Chevrolet-Perf...57851/10002/-1
looking to get $400shipped for the intake
buy both for $3150shipped!!!!!
best way to reach me is by email walhan_qtr@msn.com
Thanks
#17
good LS7 block (cracked sleeved are ok with me) 4.125 bore
LSX std deck block (no tall deck) 4.125 bore or smaller
4.000in crank 2.100 (prefer short snout)