Ported 5.3 heads $400
Ported 5.3 heads $400 Updated with Pics
I have a set of 5.3 heads 706 casting. They have been lightly ported. I had them flowed a year or so ago and they flowed 253/197.
These heads have been milled .015
Reason they were milled was my a piston had let go in the motor they were on and nicked it up a bit. They have since been milled and are good to go.
They have dual valve springs good to .650 lift and titanium retainers
I'm asking $400 dollars. I paid much more than this as I was told they flowed better than they do
They would be a good upgrade though for the money or if you wanted to have them ported even further wouldn't cost you too much.
I have a set of 5.3 heads 706 casting. They have been lightly ported. I had them flowed a year or so ago and they flowed 253/197.
These heads have been milled .015
Reason they were milled was my a piston had let go in the motor they were on and nicked it up a bit. They have since been milled and are good to go.
They have dual valve springs good to .650 lift and titanium retainers
I'm asking $400 dollars. I paid much more than this as I was told they flowed better than they do
They would be a good upgrade though for the money or if you wanted to have them ported even further wouldn't cost you too much.
Last edited by I8URLS1; Oct 15, 2008 at 10:55 PM.
