We know I can powder coat, but can I polish? Pics inside:)
We know I can powder coat, but can I polish? Pics inside:) I think everyone has seen plenty of my powder **** at this point. I hadn't really posted any of my polishing though.
Just did these items for an LS1tech member. Stuff is hard as hell to take good pictures of, I did my best, some traces of acetone from removing the compound make the metal a hair "fuzzy" with the flash. Oh well lol.
Ported the TB with the usual mods(bump stop, halfed shaft, etc). Gave the inside a little bling
Outside..all castings and numbers shaved of course
MAF ends..exterior shaved of all casting marks, etc as well and polished bolts for that extra touch.
I mentioned in another thread I'd post some pics of the sled parts I was doing in a really cool powder for a local ls1tech member so here they are. Its a multi color holgraphic effect over black, pretty neat. He gave me like half a snowmobile to do lol, took only a few pics.
I tried to get the colors in the pic but its really hard
next up will be more calipers and throttle bodies as always and also a FAST intake Nitro Dave sent me to add my touch of bling to
Let me know what you think.
Just did these items for an LS1tech member. Stuff is hard as hell to take good pictures of, I did my best, some traces of acetone from removing the compound make the metal a hair "fuzzy" with the flash. Oh well lol.
Ported the TB with the usual mods(bump stop, halfed shaft, etc). Gave the inside a little bling
Outside..all castings and numbers shaved of course
MAF ends..exterior shaved of all casting marks, etc as well and polished bolts for that extra touch.
I mentioned in another thread I'd post some pics of the sled parts I was doing in a really cool powder for a local ls1tech member so here they are. Its a multi color holgraphic effect over black, pretty neat. He gave me like half a snowmobile to do lol, took only a few pics.
I tried to get the colors in the pic but its really hard
next up will be more calipers and throttle bodies as always and also a FAST intake Nitro Dave sent me to add my touch of bling to
Let me know what you think.
Trending Topics
Shaved and polished MAF ends and polished bolts is $60.
Throttle body polished is $110 and includes free powder coating of the cam gear in color of your choice. Add $65 for porting, bump stop, half shaft,etc.
NaperWS6, I could shave a few bucks for not having to ship the stuff back to you, sure.
Jonas--big *** oven is working well, yup. Everything is cleaned up and organized again, place was a disaster when you were there with all the horsing around we did to get that thing in there and wired up lol.
oh, and here is the FAST i did tonite for Nitro Dave at N20 Outlet.
I shaved all the logos/lettering and smoothed the runners as well. Powder is a medium gray with low level metallic and a super clear over it all. You can see the corner of the big boy oven in the last pic sitting next to my small oven. I still use the little guy for small parts to save time, big oven takes over 20 minutes to get up to temp.
I shaved all the logos/lettering and smoothed the runners as well. Powder is a medium gray with low level metallic and a super clear over it all. You can see the corner of the big boy oven in the last pic sitting next to my small oven. I still use the little guy for small parts to save time, big oven takes over 20 minutes to get up to temp.
Man that thing looks good. I was going to sale this one and buy a new one for something we are doing in our PRI booth. Maybe I will use this one and sale it after PRI.LOL
Thank you for the awesome work and great customer service!
Dave
Thank you for the awesome work and great customer service!
Dave
