AFR 225s, 72cc and LS6 intake
Thread Starter
8 Second Club
iTrader: (34)
Joined: Nov 2001
Posts: 10,852
Likes: 1
From: Knoxville, TN
AFR 225s, 72cc and LS6 intake AFR 225, 72cc heads with the 8019 springs. Bought them in March this year, only ran them for 60 passes and zero street miles. They are the newer design with some smaller water holes to make the decks stronger for FI and nitrous. Not a thing wrong with them, I would bolt them on as-is unless you are going big power adder (700hp +) then I would get them surfaced. I did a big wheelstand and broke the oil pan/cracked the block so I'm parting the engine out. These are great all-around heads. Pending sale.
LS6 intake in very nice shape, no cracks or stripped anything, comes with the cooling pipe/plugs you need to convert over from an LS1 intake. Gaskets look like they can be used again. SOLD
LS6 intake in very nice shape, no cracks or stripped anything, comes with the cooling pipe/plugs you need to convert over from an LS1 intake. Gaskets look like they can be used again. SOLD
Last edited by kp; Dec 12, 2008 at 12:02 PM.
