*Not much left* RC 80# INJ's, Fox body DSL, Chrome 12mm lug locks for F'body....OBO!!
#1
*Not much left* RC 80# INJ's, Fox body DSL, Chrome 12mm lug locks for F'body....OBO!!
Category: Racing Parts
Price: $2147483647
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird
Location (State): IL
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9
LS Engine?: Fits LS Engine
*ALL THE BIG TICKET ITEMS HAVE THE SAME PRICE BUT INCLUDE FREE SHIPPING NOW TO THE MAINLAND STATES*
RC 750cc injectors 71# @ 43.5 psi, right around 80# @ LS fuel pressures of 58 psi. Bought as having 3000 miles of use. Has all O'rings and look brand new. These are the short fat ones and are ready to go!.....$400
McGard wheel locks for GM. Brand new in the box. 2 lug washers are missing from the box in the pic but i have new ones for them. $15 takes them! + shipping
D/S Loop for a fox body. Never used and comes with hardware other than whats needed to bolt it to the floor. Forget the brand. Zinc coated and painted black. $25 takes it! + shipping
--------------------------------------------------------------------------
SOLD!!! Strange Manual master cylinder with Biondo line lock setup and braided line, stainless hardware and firewall adapter for f'body. This is BRAND NEW.......$300
SOLD!!! Will have pics up tomorrow! Now will also include tubular trans x-member as well for no extra!
BMR X-Treme C/Moly T/A with cross bar and D/S Loop (you will only need the tabs for the cross bar to weld to your sfc's or easily make your own)....New $600.....$350
SOLD!!! Moser 9" The oil under the rear on the cardboard is because the 3rd member was removed for pics so whatever bit of gear lube was left leaked out. There's absolutely nothing wrong with the rear whatsoever! It's p/c black with lca relos and BMR arb brackets welded on (arb brackets were not coated, just cosmetics and can be painted obviously). Rear is STOCK WIDTH, TRU-TRAC DIF, 4.11's with about 2000 miles on them and is Quiet! Nodular center, 31 spline and will come with backing plates but is not set up for abs BUT MOSER SELLS THE 4 CHANNEL CONVERSION KIT FOR $75 COMPLETE IF YOU WANT ABS! PART#9A22. All you will need is your T'bolts. Also has common 1/2" studs. $2000
SOLD!!! 853 Heads, unknown mileage but complete and assembled.....$50 + shipping
SOLD!!! 317's Heads disassembled and cleaned up (no port work) and assembled by HKE. Patriot dual gold springs w/titanium retainers and stainless exh valves, stock int valves, 70-71cc chambers after surface cleaning, and are assembled, ready to go. $500
SOLD!!! BMR X-Treme Anti Roll Bar....you will need the 2 tabs with the studs for the end links to bolt on to and the axle tube mounts.....New $400.....$200
SOLD!!! Precision PT88 Turbo and blanket....Brand new, never mounted! Will come with a Brand New turbo blanket! Journal bearing, .96 ar, t4 flange. [COLOR="Red"]$1350
SOLD!!! BMR (correction...not the X-tremes) C/M LCA's, on car adjustable with poly bushings, black....New $240.....$125 Link...https://securec20.ezhostingserver.co...&productid=271
SOLD!!! EPP Blower Cam...Brand new in the plastic! $325
SOLD!!! LS2 rockers with bolts and stands, 8K miles....$100
SOLD!!! Dual Walbro fuel pump setup, Brand new in the box.......$200
SOLD!!! Weld Draglites 15x3.5" skinnies with spacers. No curb rash but aren't "perfect", but they look great in the sun! Come with centers and chrome lugs. Plenty of shine!!!.........$200
SOLD!!! Weld Draglites 15x10 7.5" bs.......Same deal, nothing wrong with these and they shine very well but aren't 100% mint. Come with centers and chrome lugs for 1/2 studs.......$275
SOLD!!! Moroso type (unknown brand) catch can with K&N breather, -an fitting, and has petcock, $25 takes it!
SOLD!!! S&W swingout kit, brand new in the pkg. $20 takes it!
SOLD!!! Billet grill in pretty decent shape, better with 15 mins of time taken to polish it up. Comes with the screws for a direct bolt in, no drilling required. $25 takes it!
Last edited by PRAY HRD; 08-12-2011 at 02:14 PM.
Trending Topics
#12
Just moved into a house at the first of the month and decided the cost was growing too much and no matter what, i'll never be happy with the power and always want more! So i picked up a nitrous kit and will just use that the couple times a year i go to the track. Still may do it one day but now isn't the time. I just wanna get out and enjoy the car.
#14
About 8k miles were put on the rear, 2000 on the current 4.11's.
I can ship it but you're looking at $150 (with insurance) and would have to be picked up in phoenix. There's a carrier i've used several times for shipping rears, engines and tran's and i know they have a terminal there. Very easy, just go in, sign for it and get it loaded in your vehicle. The linehaul co. is ForwardAir. Very big, Very reputable!
I'm using the d/s so you'll need one.
I can ship it but you're looking at $150 (with insurance) and would have to be picked up in phoenix. There's a carrier i've used several times for shipping rears, engines and tran's and i know they have a terminal there. Very easy, just go in, sign for it and get it loaded in your vehicle. The linehaul co. is ForwardAir. Very big, Very reputable!
I'm using the d/s so you'll need one.