Built 4L60E, Yank SS3600, TCI Flexplate, Cooler, Harness
Built 4L60E, Yank SS3600, TCI Flexplate, Cooler, Harness Category: Drivetrain
Price: $1
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird
Location (State): MD
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6
LS Engine?: Fits LS Engine
Extreme Automatics 4L60E, Rated for 700hp.....SOLD
Yank SS3600 converter....SOLD
TCI SFI Flexplate......SOLD
Harness to adapt 6spd to 4L60E.....SOLD
B&M 70274 Cooler with Teflon braided lines and fittings....SOLD
ttnicolaisen@gmail.com
List for the trans build
Extreme Automatics 4L60E
The heart of the EA 4L60E is the Valve Body calibration. Great parts mean nothing if you cant keep the clutches in the transmission. We completely rebuild the valve body with new hard anodized oversize valves in the areas that we know there is a problem. This is what make the EA 4L60E so reliable. We completely eliminate the 1890 code, 3/4 clutch failure due to inadequacy in the valve body. Shifts are quick and clean. Our 4L60s don't bang!!!
•Only Select cores are used
•Case is Media Blasted and race Preped
•All New Seals and Gaskets
•EA Exclusive Valve Body and Spacer Plate
•New Delco Input Drum and Shaft
•Sleeved Input Drum
•Cryoed Input Drum
•Input Shaft Sealed to drum to eliminate cross leaks
•All New Bushings (Extra Wide where needed)
•All New Torrington bearings
•Pinless accumulators
•Billet anchor pin
•Beast Sun Gear Shell
•New Delco Reverse drum
•Planets have all New Pinion Thrust Washers
•Pump Parallel Decked
•New delco 13 vane pump assembly
•Billet Pump Rings
•Multi Directional 13 plate Metallic Fiber 3/4 clutch pack
•Hi Energy Forward Clutch
•Hi Static Low rev Clutch
•HD Over run sprag
•HD Low roller Clutch
•Wide Metallic Fiber Band
•Billet 2nd Servo
•Billet 4th Servo
Last edited by Cobra R; Oct 12, 2011 at 07:58 PM.
