Category: Engine - Complete Motors
Price: $3200
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette, 04-06 Pontiac GTO, 04+ Cadillac CTS-V, 67-92 Chevrolet Camaro, 67-92 Pontiac Firebird
Location (State): MD
Item Condition: Used
Engine: LS1/LS6
LS Engine?: Fits LS Engine

I am parting out my 1993 mustang ls1/t56 swap. Have some things that I need to take care of and i dont have the time to make the car into what I want. Im gonna start by listing the motor and trans first, once that sells the swap stuff will follow. The motor and trans and in the car so if you want to hear it run etc it can be arranged. I will need a deposit prior to pulling and a weeks top to get it pulled. On to the details

Motor and trans are out of an 02 camaro with 49k miles. I purchased it through Fran at Race Proven Motorsports they pulled it out of a customers car.

Motor: Made 417/389 through 4.10s and 28" E.T. streets Deposit reieved
-Stock ls6 intake manifold
-Stock TB
-Stock 241 heads with basically new valve springs that came with the EPS cam kit(200 miles of run time tops)
-EPS 234/246 .601/.606 112+2 cam(200 miles tops, installed by RPM)
-Brand New Melling 10296 High Volume Oil Pump
-Brand New LS2 Timing chain
-Brand new SLP 25% U/D
-Brand New CTS-V Oil Pan and pickup
-Brand new Metco Breather
-Refurbished Delphi Alternator(200 miles)
-Brand new starter
-Brand New Waterpump
-Brand new coolant crossover lines
-Brand new Coolant, IAT, Oil Pressure, and Oil level sensors
-Stock MAF
-Low mileage G8 GT coil packs with new MSD plug wires
-New Intake manifold gaskets
-No A/C or Power Steering
-Will not come with wiring harness or motor mounts
-Will include new PCM with RPM tune for $200

Trans: SOLD
-49k mile T56 out of the same camaro
-No grinds, no popping out of gear etc performs flawlessly
-Quicktime SFI bellhousing
-Pro 5.0 Shifter with short stick and hurst leather ****
-Mcleod Original Street Twin Clutch
-Mcleod Master
-Remote Bleeder

Prices are firm:
Motor-$ 3200 Deposit recievedTrans and clutch $2000SOLD
Located in Harford County MD, not willing to ship at the moment. Also not willing to part out motor or trans setup.
http://www.youtube.com/watch?v=bjDGk..._order&list=UL
http://www.youtube.com/watch?v=SEtZT13zvAk

 

Id be interested in the wiring harness

 

Its a PSI conversion standalone swap harness for an ls1/t56 DBC. Ill be looking to get 400+actual shipping. I want to try and sellt he motor first so if they want to see it start and run then they can.

 

How much for the driveshaft

 

Ill do $300+shipping on the driveshaft. It was custom made and I was told it would handle whatever i threw at it. It fit like a glove. I will not be pulling that out until i pull the motor in case someone wants to drive the car before buying the motor and or trans.

 

Bump ttt

 

Still available?!?

 

Pm sent ^^^


Trans is pending sale locally. Bellhousing and clutch master will be for sale seperate however.

Quicktime Bellhousing(has a hole cut in it by previous owner for inspection purposes i guess. $300

Mcleod CNC adjustable clutch master $100

 

bump ttt

 

Deposit sent

 

Motor is sold and trans is pending

 

QuickTime bellousing is off the car and ready to go $300+ actual shipping

Psi conversion harness is also ready to go with the optional fbody fan plug ins $400 plus actual shipping

Kooks 1 3/4 fox swap long tubes. Mild steel that I will be sanding and painting with header paint for the buyer. $380+ shipping


Custom made steel driveshaft for ls1 t56 to 8.8. Only 200 miles on it tops. $300+ actual shipping

 

interested in the headers, would like to see a pic before you touch them up.

 

What's your email I can send them to

 

is the pcm for sale and how much?

 

PCM is going with the motor since it already has a tune for the cam in it.

 

Sold

Thanks again man, great seller

 

Does driveshaft come with yoke, any pics of it? Did you uses AJE kmember, i ask because that way it should be the length im needing? what kind of exhaust did you you have hooked up to the Kooks?