FS: cleaning out garage.
Thread Starter
Launching!
iTrader: (17)
Joined: Jan 2011
Posts: 221
Likes: 0
From: New Braunfels, TX
FS: cleaning out garage. Looking to clear out a few items that have just been collecting dust in my garage, Willing to ship mostly everything at buyers expense.
7Pc Durablock Sanding Kit - SOLD
NBM Passenger Headlight Cover - $15
Have it left over from a headlight assembly i pulled awhile back, was from a 2000 I think but who knows. Few nicks n dings but still in good condition.
Driver Side Headlight Bezel - $15
Same thing as cover, left over from headlight pull. Nothing wrong with it, just a little dirty and has slain a few bugs I believe.
Stock Firebird locking lug-nuts w/ key - SOLD
T-Top Holders - $25
Still have these left over from when I had the plans to do t-top conversion, in decent shape just need a soapy bath.
Rhynostick Adhesive backed sandpaper + Eastwood Pre painting prep - $35
Paid $55 + shipping at the time. The sandpaper 1 is still un-opened and the other has about 98% in it. P400 is the Grit. Cans are full. Has sticky back that slaps right onto the durablocks with a tight fit.
Stock F-body Springs - $35:
All around (4), came from my 98 Formula, as I just finished putting BMR kit on these are just collecting dust.
Stock F-body Panhard - $15:
Same as above, bushings are in decent shape and worked fine before I took it off and installed an adjustable.
Any questions, more pic request just PM or post up, At this time ALL PRICES ARE OBO!Thanks,
-Colin
7Pc Durablock Sanding Kit - SOLD
NBM Passenger Headlight Cover - $15
Have it left over from a headlight assembly i pulled awhile back, was from a 2000 I think but who knows. Few nicks n dings but still in good condition.
Driver Side Headlight Bezel - $15
Same thing as cover, left over from headlight pull. Nothing wrong with it, just a little dirty and has slain a few bugs I believe.
Stock Firebird locking lug-nuts w/ key - SOLD
T-Top Holders - $25
Still have these left over from when I had the plans to do t-top conversion, in decent shape just need a soapy bath.
Rhynostick Adhesive backed sandpaper + Eastwood Pre painting prep - $35
Paid $55 + shipping at the time. The sandpaper 1 is still un-opened and the other has about 98% in it. P400 is the Grit. Cans are full. Has sticky back that slaps right onto the durablocks with a tight fit.
Stock F-body Springs - $35:
All around (4), came from my 98 Formula, as I just finished putting BMR kit on these are just collecting dust.
Stock F-body Panhard - $15:
Same as above, bushings are in decent shape and worked fine before I took it off and installed an adjustable.
Any questions, more pic request just PM or post up, At this time ALL PRICES ARE OBO!Thanks,
-Colin
Last edited by colinpd137; Jun 3, 2012 at 04:56 AM.