DMH Cutout, TB, Free Hood and misc parts
Thread Starter
11 Second Club
iTrader: (11)
Joined: Nov 2007
Posts: 31
Likes: 0
From: Kent Island MD
Trying to clear out a few spare parts laying around.
Stock LS1 Throttlebody with sensors(removed from 00) Formula -$50 obo
DMH Electric Cutout 3". All wiring is included, never installed, switch does not work(also included). I have tested the cutout and it opens and closes perfectly. Great replacement if yours stopped working, or if you just buy a new switch. $125 obo
Stock Hood from 2000 Formula - Artic White - FREE come and get it

Misc stock parts (make offer)
torque arm
rear control arms
front and rear sway bars
AIR pump
Upper Air Box
Stock bellow
(6) 16x8 T/A Wheels - SOLD
Stock Injectors - SOLD
UMI STB - SOLD
Will update with additional stock parts as I dig them out them.
Stock LS1 Throttlebody with sensors(removed from 00) Formula -$50 obo
DMH Electric Cutout 3". All wiring is included, never installed, switch does not work(also included). I have tested the cutout and it opens and closes perfectly. Great replacement if yours stopped working, or if you just buy a new switch. $125 obo
Stock Hood from 2000 Formula - Artic White - FREE come and get it

Misc stock parts (make offer)
torque arm
rear control arms
front and rear sway bars
AIR pump
Upper Air Box
Stock bellow
(6) 16x8 T/A Wheels - SOLD
Stock Injectors - SOLD
UMI STB - SOLD
Will update with additional stock parts as I dig them out them.
Last edited by Formula Dave; Mar 13, 2014 at 08:27 PM.
Thread Starter
11 Second Club
iTrader: (11)
Joined: Nov 2007
Posts: 31
Likes: 0
From: Kent Island MD
That is correct. The non-working switch and all wiring is included.
I got this from a friend who decided not to install it, and I've kept it as a backup to the one on my car.
Get a new switch do a little soldering and you're good to go.
Note: this does not include the y-pipe, only the electric cutout.
I got this from a friend who decided not to install it, and I've kept it as a backup to the one on my car.
Get a new switch do a little soldering and you're good to go.
Note: this does not include the y-pipe, only the electric cutout.



