SOLD CCW Classics 17x9.5, 17x10.5 or 18x10.5 SOLD
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Mar 2007
Location: Wichita, KS
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
SOLD CCW Classics 17x9.5, 17x10.5 or 18x10.5 SOLD
Category: Wheels & Tires
Price: $1600
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette
Location (State): KS
Item Condition: Used
Shipping Information: Item Can be Shipped
LS Engine?: Fits LS Engine
I've got a set of 17" CCW's I just refinished. These are the swiss cheesed race wheels (no center caps). This is how they're currently configured for a camaro:
17x10.5 ET38.1 2.5" lips (wide enough for 315's!)
17x9.5 ET38.1 1.5" lips, plenty of BBK clearance with the thick pad centers
I can also configure these very close to C5 Z06 fitment:
17x9.5 ET51 (spaced ~.12" further out than stock 54mm)
18x10.5 ET51 (spaced ~.28 further out than stock 58mm)
$1600 SOLD OBO+shipping
For fitment look here:
https://ls1tech.com/forums/wheels-ti...mm-offset.html
The fronts should be 1/2" further out, closer to flush. The rears would be just slightly more tucked with a 315mm tire in the back.
If the specs don't quite match what you need, I have another pair of 2.5" lips or I could assemble them with other parts if you provide them (I'm flexible). For $250 more I'll buy and assembly them with brand new 3" lips in back, making them 17x9.5 fronts and 17x11 rears with 32mm offset.
$1600 SOLD OBO + shipping. I would trade for ported 243's+ a little cash, a car trailer, or a Polaris Scrambler.
Wheels are located in Wichita, KS, the best way to contact me is (my screen name here)@gmail.com or call/text at 785-230-9516.
I've got plenty of other photos here:
http://s405.photobucket.com/user/roo...s%20for%20sale
Last edited by roostmeyer; 02-16-2015 at 07:54 AM. Reason: wrong section
Trending Topics
#15
Teching In
Thread Starter
iTrader: (1)
Join Date: Mar 2007
Location: Wichita, KS
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
I don't think 14" rotors will fit. The thicker pads on the front of these wheels will give a ton of outboard caliper clearance, but the barrel is going to be the limiting factor for radial clearance.
I had 2010+SS brakes on my car for a little bit and I had to switch to 18x8.5 barrels, the 18x8" ones necked down earlier and wouldn't clear. CCW has different steps depending on the size of the barrel and the only way I know to find this out is to call and ask.
So short version, some 17" CCW's may clear, but these ones won't.
I had 2010+SS brakes on my car for a little bit and I had to switch to 18x8.5 barrels, the 18x8" ones necked down earlier and wouldn't clear. CCW has different steps depending on the size of the barrel and the only way I know to find this out is to call and ask.
So short version, some 17" CCW's may clear, but these ones won't.
#20
Teching In
Thread Starter
iTrader: (1)
Join Date: Mar 2007
Location: Wichita, KS
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
The pics up above are from Wednesday last week. I think they may have gotten one tiny little scratch from the swap meet this weekend, but that's it.
The pics on top here are from the same day: http://s405.photobucket.com/user/roo...s%20for%20sale
The pics on top here are from the same day: http://s405.photobucket.com/user/roo...s%20for%20sale