Default 1998 SS w/ moser 9 inch part out and other goodies for sale
#1
Teching In
Thread Starter
iTrader: (2)
Join Date: Jun 2013
Location: Tx
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Default 1998 SS w/ moser 9 inch part out and other goodies for sale
Category: Engine - Complete Motors
Price: $1
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette, 04-06 Pontiac GTO, 04+ Cadillac CTS-V, 67-92 Chevrolet Camaro, 67-92 Pontiac Firebird
Location (State): TX
Item Condition: Used
Engine: LS1/LS6
LS Engine?: Fits LS Engine
Moser 9 inch strange nodular center 3.89 gears with a wavetrac rear end is perfect just needs to be painted that is all I just need a 10 bolt to out the car back rolling dont care if its broke. -2500 picked up
Chromoly drive shaft for the 9 inch to T56 -200
SS Hood -500
SS Wing -275
BMR Torque Arm w/ BMR relocation bracket for T56 -400
Harness/PCM -350
17x9 17x11 ZR1 wheels brand new front 275 Nitto DR 315 rears -600
Two Tenzo R racing buckets -300 for the pair
I just listed the big things so if you want anything else just let me know its a complete roller OR you can buy the whole thing for 3500 but once the partout start thats it. THIS CAR HAS NOT TITLE NO ITS NOT STOLEN PREVIOUS OWNER IS TRYING TO CHARGE ME TO GET THE TITLE.
Got a lot of other things also heres a small list to start off with.
1998 short block ls1 no oil pan needs complete rebuild -450
Corsa cat back -350
Bassani cat back -350
3 Aluminum stock drive shafts -100 a piece
LS based T56 72k miles -SOLD
Got 4 lids 2 slp -70 1 MTI -80 FTP 98mm lid has holes drilled for a dry kit just plug it up -90 Carbon Fiber Knock off lid -70
3 F body oil pans -200 picked up comlete with pick up and windage tray
FIC 127lb injectors -700
Magnafuel 750 w/ pre post filters BNIB - SOLD
LS6 Valley cover -100
Stock set of low mileage LS1 pistons -120
10lb nitrous botle I have 2 -100 each 15lb bottles I have 2 -150 each
Other misc nitrous parts just ask.
1998 Z28 M6 roller w/ 3.42 rear end no harness/pcm rough car but all there -650
I also have a 93 SSP foxbody coupe roller that I bought earlier last year from a guy here in town said he was a member I have yet to find him though. Car is white has full wolfe adjustable rear suspension with anti roll bar welded in. Built 8.8 with strange 35 spline axles 3.73 locker and aluminum girdle. AJE LS k member with tubular lowers. Weld in sub frame connectors. Has a 6 point cage. Car had grey interior I pulled it out to paint the cage and bought brand new black and carpet and two kirkey pro drags with black covers. Also have black door panels. Car has a 700 PSI harness and computer. Im currently in the process of smoothing out the engine bay I have all the panels from scott rod fab just needs to finished. Car is also 5 lug swapped and has disc brakes on all four corners comes with pro stars with a 28x10.5S bias ply and front runners. Car needs front shocks installed to be rolling on all four again and interior installed with motor/tranny. Harness is setup for LS1 with a 4L60 I have the tranny cross member as well. Front suspension is currently off due to not having front springs. Looking for 5k firm for the way it sits every piece of suspension on this car is aftermarket. Car was running 9.xx previously cam only with 100 wet kit.
Got a LS1/4L60 pull out also. Motor was just recently rebuilt ~10k miles ago very clean motor. Motor is cam only with TSP 228R cam with PAC springs. Tranny is a built 4L60 with upgraded clutches and bands with a circle D stall. Asking 3800 for the pull out.
This is a small list of parts I've got a big Snap On tool box and big compressor and a ton of other parts just putting out a feeler. Reason for selling is I lost my grandmother in November so thinning out what I've got and going to buy a new house and concentrate on one car. I am located in Houston/Pearland Tx all prices are picked up I can ship the smaller stuff but dont want to deal with the big things sorry.
Last edited by CompoundBoostedLSX; 01-22-2015 at 09:46 PM.
Trending Topics
#16
Teching In
Thread Starter
iTrader: (2)
Join Date: Jun 2013
Location: Tx
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Sorry about the late reply guys been a busy week. Driveshaft is 41 inches center to center. I do have a power steering pump got one more sold one today. Id seperate the motor and tranny yes. I have a buyer for the tranny just need one for the motor, stall is 3200 if I remember right.