> > > FS: Push Rods, Super7 Ti Retainers, Super7 Locks < < <
11-30-2005, 11:16 AM
#1
TECH Junkie
Thread Starter
iTrader: (28)
Join Date: Jan 2004
Location: Houston
Posts: 3,250
Likes: 0
Received 0 Likes
on
0 Posts
> > > FS: Push Rods, Super7 Ti Retainers, Super7 Locks < < < Please, no dibs. All items are off the car ready to pickup/ship to the first person with cash in hand, or paypal. Please PM for fastest response. Click pics for larger version.
16 CV Hardened Push Rods - Sold!
7.350"
~ 9k miles
Push rods are in excellent shape and would be well suited for milled heads. My new set up requires a different length push rod so I must part with these.
NIB 16 Super7 Titanium Valve Spring Retainers and 17 Locks - Sold!
These are new and have never been installed, just one lock and retainer was used for a test fit. These were included with a Patriot Gold dual valve spring kit, but the locks would not fit my valves (I'm using non-ls1 valves). As you can see in the pictures, Patriot included one extra pair of valve locks.
16 CV Hardened Push Rods - Sold!
7.350"
~ 9k miles
Push rods are in excellent shape and would be well suited for milled heads. My new set up requires a different length push rod so I must part with these.
NIB 16 Super7 Titanium Valve Spring Retainers and 17 Locks - Sold!
These are new and have never been installed, just one lock and retainer was used for a test fit. These were included with a Patriot Gold dual valve spring kit, but the locks would not fit my valves (I'm using non-ls1 valves). As you can see in the pictures, Patriot included one extra pair of valve locks.
Last edited by TAQuickness; 12-16-2005 at 12:57 PM.
