Loudmouth and Flowmaster in PERFECT condtion!!
Thread Starter
12 Second Club
iTrader: (7)
Joined: Jul 2005
Posts: 275
Likes: 0
From: La Plata Maryland
Loudmouth in PERFECT condtion!! i have a original loudmouth for sale (not the loudmouth ll..not loud enough). it has about 600 miles on it and is in perfect condition. the welds have not even begin to rust on it. it has never seen the snow or even rain just like the car. it has the single slash tips with the SLP logo on the end of each one. when i got the exhaust it came with these cheap U clamps which stuck out like a sore thumb so i welded the two tips as well as the middle section after the axel and it looks 
the only problem is now that piece is big and will be too expensive to ship therefore i have to sell it locally. i am willing to drive halfway to meet somewhere for your convenience. also when i took it off the car i had to cut the pipe right after the axel to slip it out. i took it to an exhaust shop and they said it would be no more than $15-$20 to weld it (the piece that needs to be welded is the one at the top of the third picture down). i would do it for you but it has to be done at the time of the install. the pieces are already marked for the welder and marked for installation directions. like i said it is in perfect condition and sounds unreall!!!!! the only reason i got rid of my set-up was because i got a true dual system for free and couldnt pass that up.
im posting pics below, just click on the pics to make them bigger!! any questions please pm me or feel free to call me at 301-399-8924. you can look up mapquest directions to Waldorf MD, 20602 for travel time.
asking: $200-Loudmouth(still has slp warranty with papers)
Pics of SLP:
the only problem is now that piece is big and will be too expensive to ship therefore i have to sell it locally. i am willing to drive halfway to meet somewhere for your convenience. also when i took it off the car i had to cut the pipe right after the axel to slip it out. i took it to an exhaust shop and they said it would be no more than $15-$20 to weld it (the piece that needs to be welded is the one at the top of the third picture down). i would do it for you but it has to be done at the time of the install. the pieces are already marked for the welder and marked for installation directions. like i said it is in perfect condition and sounds unreall!!!!! the only reason i got rid of my set-up was because i got a true dual system for free and couldnt pass that up.im posting pics below, just click on the pics to make them bigger!! any questions please pm me or feel free to call me at 301-399-8924. you can look up mapquest directions to Waldorf MD, 20602 for travel time.
asking: $200-Loudmouth(still has slp warranty with papers)
Pics of SLP:
Last edited by YouCantCmyZ28; Jun 26, 2006 at 11:23 AM.
Trending Topics
Launching!
Joined: Apr 2006
Posts: 276
Likes: 0
From: Oak Lawn (Chicago Suburb)
Damn I am in Chicago and I would defintely buy that exhaust. The shipping would probably not be so bad or if you want to meet me in Ohio I guess lol. No seriously can we work something out. Check the UPS/ FEdex place and find out.
Thread Starter
12 Second Club
iTrader: (7)
Joined: Jul 2005
Posts: 275
Likes: 0
From: La Plata Maryland
yea the peice is so big because i welded the middle section...the only box they have that would fit it carries a 50 lb frieght charge and to send it to PA from maryland they wanted $120......i told them they can shove it!! sorry
hmm i am intrested but you really dont want to ship and i would actually pay for it. My friend had something like that shipped before and all they do is wrap in a protective coating kinda like seran wrap but thicker put it on a plane then truck and take it to you house.lol. Well if you are willing to ship this is what i want. you wiegh and i will figure out all the costs for shipping.
