Complete Roller kit & other Misc!!
Stuffs Gotta Go! Updated Prices!!! OK peeps, I have a lot of stuff that I need gone. All this stuff has about 100 miles on them (except the stock 241 heads,valves,springs etc.) As I was getting everything worked on at the shop I ran across a turbo kit that I couldnt pass up so now Im going a lil different route!! 
Losing a lot of dayum money 
but gaining a lot of Dayum HP!!! 
AGAIN this are all pretty much new stuff. RPM did all the work in Lewisville,TX
-241 Heads CNC's, Angel Cut, 2.02-1.60 Valves, Solid Roller Double springs (Comp)--over 2K new--&-Comp Cam Solid Roller Cam ($450).625 lift 252-268 duration 112+0 lsa $1000
-SS Series Jesel Roller Rockers 1.7 ratio all bolts comes with Custom Aluminum Trays for Jesels to fit-(800 new+ $200 trays)- $475.00 SOLD
-Chromoly Pushrods for this solid setup 7.25---$50
-Crane Solid lifters --$150
-Stock Bore Cometic head gaskets $50
-Stock 241 heads Unassembled but comes with comp 918 springs,valves,seats- $300 (Will assemble and lap valves if someone is interested)
-Hooker Long Tube Headers (Ceramic Coated with about 20K) 1 3/4's for LS1 WITH True Dual 3" Exhaust to fit 18" Dynomax Bullets (has a slightly used SLP X-pipe)---$350
Losing a lot of dayum money but gaining a lot of Dayum HP!!! AGAIN this are all pretty much new stuff. RPM did all the work in Lewisville,TX
-241 Heads CNC's, Angel Cut, 2.02-1.60 Valves, Solid Roller Double springs (Comp)--over 2K new--&-Comp Cam Solid Roller Cam ($450).625 lift 252-268 duration 112+0 lsa $1000
-SS Series Jesel Roller Rockers 1.7 ratio all bolts comes with Custom Aluminum Trays for Jesels to fit-(800 new+ $200 trays)- $475.00 SOLD
-Chromoly Pushrods for this solid setup 7.25---$50
-Crane Solid lifters --$150
-Stock Bore Cometic head gaskets $50
-Stock 241 heads Unassembled but comes with comp 918 springs,valves,seats- $300 (Will assemble and lap valves if someone is interested)
-Hooker Long Tube Headers (Ceramic Coated with about 20K) 1 3/4's for LS1 WITH True Dual 3" Exhaust to fit 18" Dynomax Bullets (has a slightly used SLP X-pipe)---$350
Last edited by CustomInductions; Nov 21, 2006 at 10:20 AM. Reason: updated prices
Trending Topics
LOL....Thanks for the bump...should be a good race....Ive always heard there is no replacment for displacement...and I have never riden in a turbo ls1 so I cant wait to feel it..should be done within the next week or so!
