LS1 Garage sale - NEW windshield, Nitto 555, TB, Z06 MAF, 1998 GM Service manuals...

 
Thread Tools
 
Search this Thread
 
Old Dec 27, 2006 | 01:28 PM
  #1  
360chris's Avatar
Thread Starter
Teching In
iTrader: (3)
 
Joined: Aug 2005
Posts: 27
Likes: 0
From: Albany, NY
Arrow LS1 Garage sale - NEW windshield, Nitto 555, TB, Z06 MAF, 1998 GM Service manuals...

93-02 brand NEW OEM replacement windsheild
$200

98-02 Camaro LH side Fog light with bracket, wires and wire loom [off of a 2000 Z28].
$20

JL Audio 10" VVS GM CF1 Sub Stealth Box speaker enclosure for 93-02 camaro/firebird drivers side, NEW
$100 SOLD

BRAND NEW Complete set of 4 OEM Z28 or SS 93-02 front and rear shocks/struts - 4 DeCarbon Monotube shocks and struts for 93-02 Camaro and Firebird. These are new takeoff parts, removed from a new Camaro Z/28s during the SLP conversion to SS or firehawk cars when the strut/shock option was purchased. These were found on SS cars when the option for stuts and shocks were not purchased. These make your camaro, firebird or trans am ride and handle like new!
$70 SOLD

BRAND NEW set of OEM Z28 or SS 93-02 front struts - 2 DeCarbon Monotube shocks and struts for 93-02 Camaro and Firebird. These are new takeoff parts, removed from a new Camaro Z/28s during the SLP conversion to SS cars when the strut/shock option was purchased. These were found on SS or firehawk cars when the option for stuts and shocks were not purchased.
$50 SOLD

GM factory service manuals 1998 F platform - Camaro/firebird Books 1 of 3, 2 of 3 and 3 of 3, plus suppliment Book 4
$50 for all SOLD

GM factory service manuals 1998 F platform suppliment Book 4
$20

[1] Nitto 555 275/40/17 - like new
$90 SOLD

1998 Camaro LS1 SS Ported and Polished Throttle Body, .120 ridge in front of the throttle blade removed.TPS and IAC sencors are not included. This TB has been professionally ported and polished to a mirror finish. Many hours have been put into this TB, should support 550rwhp. [LS1 TB Trans Am Z28 WS6]
$90 + core SOLD

1998 stock LS1 Camaro SS Throttle Body in very good condition
$40 SOLD


ASP LS1 alternator underdrive pulley - [slows alternator down]
$10 SOLD


Stock LS1 air box
$5

Stock artic white Z28 hood
$50 SOLD

Rear valance artic white - nice shape
$25

Rear Z28 stock spoiler artic white
$5

Z06 MAF with MAF NEW and 3 to 5 wire conversion plug also NEW
Payed $200 for both, I'll sell them for $130 for both

Last edited by 360chris; Apr 24, 2007 at 03:39 PM.
Old Dec 27, 2006 | 02:21 PM
  #2  
blkLS1's Avatar
Teching In
 
Joined: Apr 2006
Posts: 2
Likes: 0
Default

interested in the windshield. can it be shipped?
if so there needs to be a starting price for negotiation.
Old Dec 28, 2006 | 08:39 AM
  #3  
360chris's Avatar
Thread Starter
Teching In
iTrader: (3)
 
Joined: Aug 2005
Posts: 27
Likes: 0
From: Albany, NY
Default

Make me an offer - I have full retail into it and I just need to get rid of it.

Shipping I would guess will be freight - it's a large box.

-Chris
Old Dec 28, 2006 | 01:23 PM
  #4  
nycab's Avatar
Staging Lane
15 Year Member
iTrader: (7)
 
Joined: Aug 2006
Posts: 79
Likes: 0
Default

i'm no expert, but i doubt you'll be able to ship a windshield. not reliably/economically anyway. also, the z06 maf is about $150 retail from discount parts places like rockauto. that doesn't include the adapter, which retails for $30, I believe. I bought my maf for $20 shipped... silly people don't realize the truck maf = z06 maf.
Old Dec 28, 2006 | 02:37 PM
  #5  
360chris's Avatar
Thread Starter
Teching In
iTrader: (3)
 
Joined: Aug 2005
Posts: 27
Likes: 0
From: Albany, NY
Default

Where do you get the plug conversion for $30?
Old Dec 28, 2006 | 08:36 PM
  #6  
nycab's Avatar
Staging Lane
15 Year Member
iTrader: (7)
 
Joined: Aug 2006
Posts: 79
Likes: 0
Default

thats the retail price.. search anywhere. cant remember which sponsor(s) carry it. you can get just the 5-pin plug and splice for like $10 from efi connection, i think.
Old Dec 29, 2006 | 09:07 AM
  #7  
360chris's Avatar
Thread Starter
Teching In
iTrader: (3)
 
Joined: Aug 2005
Posts: 27
Likes: 0
From: Albany, NY
Default

You think?
Old Dec 29, 2006 | 11:17 AM
  #8  
nycab's Avatar
Staging Lane
15 Year Member
iTrader: (7)
 
Joined: Aug 2006
Posts: 79
Likes: 0
Default

5-pin maf connector, $8.75+ship : http://www.eficonnection.com/eficonn..._pigtails.aspx

You _can_ definitely splice. 3 pins for maf, 2 pins for iat. the new maf just combines both into one unit. It's not complicated, but most people don't like messing with their harness like that. I'd rather not cut into my harness, but I'm not willing to spend $30 on it, either.

pace 5-pin adapter, $29.95+ship : http://paceperformance.com/index.asp...OD&ProdID=8139
and for the z06 maf, i just went to rockauto.com and chose a 2002 corvette z06 as my car, went to emissions and there it was.

Overall, I think you're offering a reasonable discount when compared to new.
Old Dec 29, 2006 | 04:41 PM
  #9  
360chris's Avatar
Thread Starter
Teching In
iTrader: (3)
 
Joined: Aug 2005
Posts: 27
Likes: 0
From: Albany, NY
Default

Thanks for the info. But both of those are not what I'm selling - I payed $50 for mine - because its worth $50 - it's not those cut in style ones or a hookie one from pace that has all that extra garbage on it. It's a nice high quality 5 to 3 pin connector. Any cheaper than what I'm asking - I'll keep it.

-Chris
Old Dec 29, 2006 | 08:29 PM
  #10  
Mike Cordero's Avatar
TECH Resident
15 Year Member
Photogenic
Photoriffic
Shutterbug
iTrader: (123)
 
Joined: Aug 2006
Posts: 792
Likes: 5
Default GM factory Service manuals

Look at a PM.
Old Dec 29, 2006 | 09:07 PM
  #11  
Raben's Avatar
Launching!
iTrader: (5)
 
Joined: May 2003
Posts: 285
Likes: 0
Default

Im interested in the 3 to 5 wire connection plug. I have a 99 vette with a 3 wire and just bought a Ls6 Maf and now need the harness. How much will you let the 3 to 5 wire harness go for?
Old Dec 30, 2006 | 01:11 AM
  #12  
nycab's Avatar
Staging Lane
15 Year Member
iTrader: (7)
 
Joined: Aug 2006
Posts: 79
Likes: 0
Default

Originally Posted by 360chris
Thanks for the info. But both of those are not what I'm selling - I payed $50 for mine - because its worth $50 - it's not those cut in style ones or a hookie one from pace that has all that extra garbage on it. It's a nice high quality 5 to 3 pin connector. Any cheaper than what I'm asking - I'll keep it.

-Chris
whoa hold up there cowboy. You're selling the maf and adapter as a combo, so the price on the adapter is moot. second, extra garbage? this adapter has 3 plugs - a 3-pin (maf) and 2 pin (iat) connector for connecting to the existing harness and a 5-pin for connecting to the new z06 maf. i've searched around, and i haven't seen a different manufacturer for the adapter.

also, there's no need to get upset. as i said earlier, you're selling your stuff for cheaper than the retail price. i was just providing some info.
Old Dec 30, 2006 | 07:30 PM
  #13  
00 black ram air's Avatar
On The Tree
iTrader: (15)
 
Joined: Mar 2004
Posts: 166
Likes: 0
Default

pm sent
Old Dec 30, 2006 | 08:01 PM
  #14  
Mike Cordero's Avatar
TECH Resident
15 Year Member
Photogenic
Photoriffic
Shutterbug
iTrader: (123)
 
Joined: Aug 2006
Posts: 792
Likes: 5
Default Service Manuals

Originally Posted by Mike Cordero
Look at a PM.
Did you check my PM? What about it? Let me know.
Old Dec 30, 2006 | 10:00 PM
  #15  
Pro Stock John's Avatar
LS1Tech Co-Founder
20 Year Member
Community Influencer
iTrader: (34)
 
Joined: Nov 2001
Posts: 45,305
Likes: 1,731
From: Chicago, IL
Default

What kind of shape are the manuals in?
Old Dec 31, 2006 | 07:59 AM
  #16  
360chris's Avatar
Thread Starter
Teching In
iTrader: (3)
 
Joined: Aug 2005
Posts: 27
Likes: 0
From: Albany, NY
Default

Manuals are in good used condition.

-Chris
Old Dec 31, 2006 | 11:16 AM
  #17  
360chris's Avatar
Thread Starter
Teching In
iTrader: (3)
 
Joined: Aug 2005
Posts: 27
Likes: 0
From: Albany, NY
Default

All PMs answered. Manuals are sold. Thanks to all who showed interest.

-Chris
Old Jan 3, 2007 | 02:11 PM
  #18  
360chris's Avatar
Thread Starter
Teching In
iTrader: (3)
 
Joined: Aug 2005
Posts: 27
Likes: 0
From: Albany, NY
Default

ttt_ttt
Old Jan 4, 2007 | 10:34 AM
  #19  
360chris's Avatar
Thread Starter
Teching In
iTrader: (3)
 
Joined: Aug 2005
Posts: 27
Likes: 0
From: Albany, NY
Default

ttt_ttt
Old Jan 4, 2007 | 08:16 PM
  #20  
Raben's Avatar
Launching!
iTrader: (5)
 
Joined: May 2003
Posts: 285
Likes: 0
Default

Need a little help I bought the 85 mm Delphi and I also bought the harness to go with it in my C5 and well I cant seem to get it to work have any suggestions?



All times are GMT -5. The time now is 12:59 PM.