LT1 guys come inside!

 
Thread Tools
 
Search this Thread
 
Old Dec 30, 2006 | 05:48 PM
  #1  
vigalante LT1's Avatar
Thread Starter
10 Second Club
iTrader: (4)
 
Joined: Aug 2006
Posts: 146
Likes: 0
From: macclenny florida
Default LT1 guys come inside! PARTS FOR SALE

I have done a heads and cam swap and I have a few parts for sale! All parts prices are shipped prices. No shipping charge.

CC306 Camshaft w/5500 miles-$100.00 SOLD!!
Stock LT1 Heads w/Comp Beehive Springs and Comp guide plates-$300.00
(one header bolt hole is stripped out and one intake bolt is broken off in the head) Heads were freshened up 10,000 miles ago.
10 Bolt bearing and seal kit-$50.00
Stock LT1 throttle body w/air foil-$20.00 Sold
Stock 93' LT1 Intake(painted black)-$50.00 SOLD!!
TH350 Custom 2500 Stall Converter-$100.00
Underdrive Pulley-$30.00 SOLD!!
93 Camaro Fuel Rails-$35.00

E-mail or pm for pics. jnorkavage@nefcom.net
If you have any questions call before 10pm est. 904-259-9474

-Thanks, Justin

Last edited by vigalante LT1; Feb 16, 2007 at 12:47 PM. Reason: Add information
Old Dec 31, 2006 | 07:56 AM
  #2  
vigalante LT1's Avatar
Thread Starter
10 Second Club
iTrader: (4)
 
Joined: Aug 2006
Posts: 146
Likes: 0
From: macclenny florida
Default

bump!
Old Dec 31, 2006 | 10:19 AM
  #3  
400hp ss's Avatar
Staging Lane
iTrader: (6)
 
Joined: Sep 2004
Posts: 98
Likes: 1
From: Woodstock, ga
Default

I will take the cam Paypal address.
Old Jan 1, 2007 | 10:16 AM
  #4  
vigalante LT1's Avatar
Thread Starter
10 Second Club
iTrader: (4)
 
Joined: Aug 2006
Posts: 146
Likes: 0
From: macclenny florida
Default

cam is sold!
Old Jan 1, 2007 | 11:02 AM
  #5  
vigalante LT1's Avatar
Thread Starter
10 Second Club
iTrader: (4)
 
Joined: Aug 2006
Posts: 146
Likes: 0
From: macclenny florida
Default

TTT Pics added!!
Old Jan 2, 2007 | 01:14 PM
  #6  
vigalante LT1's Avatar
Thread Starter
10 Second Club
iTrader: (4)
 
Joined: Aug 2006
Posts: 146
Likes: 0
From: macclenny florida
Default

Mid Day Bump!
Old Jan 2, 2007 | 06:21 PM
  #7  
vigalante LT1's Avatar
Thread Starter
10 Second Club
iTrader: (4)
 
Joined: Aug 2006
Posts: 146
Likes: 0
From: macclenny florida
Default

Intake Sold!! All prices are not final Make Me Reasonable Offers if interested.
Old Jan 3, 2007 | 06:18 AM
  #8  
vigalante LT1's Avatar
Thread Starter
10 Second Club
iTrader: (4)
 
Joined: Aug 2006
Posts: 146
Likes: 0
From: macclenny florida
Default

Morning Bump!!
Old Jan 3, 2007 | 09:24 AM
  #9  
Bipolar's Avatar
Staging Lane
 
Joined: Nov 2005
Posts: 76
Likes: 0
From: Evansville Indiana
Default

How much over stock is that stall?
Old Jan 3, 2007 | 10:07 AM
  #10  
Rocko71's Avatar
On The Tree
iTrader: (3)
 
Joined: Dec 2005
Posts: 105
Likes: 0
From: Briceville, TN
Default

do you have the bolts for the underdrive pulley? and do you paypal? thanks.
Old Jan 3, 2007 | 11:48 AM
  #11  
JUICED96Z
Guest
 
Posts: n/a
Default

Seal kit have the shims /crush sleeve and all? Thats all I need, my rear only has like 20k miles on it with synthetic gear oil.

If it does, interested in selling just the gasket, shims, and crush sleeve?
Old Jan 3, 2007 | 12:17 PM
  #12  
vigalante LT1's Avatar
Thread Starter
10 Second Club
iTrader: (4)
 
Joined: Aug 2006
Posts: 146
Likes: 0
From: macclenny florida
Default

No, I would really like to sell it all as a sealed kit.

-Thanks

Last edited by vigalante LT1; Jan 3, 2007 at 12:23 PM.
Old Jan 3, 2007 | 12:42 PM
  #13  
vigalante LT1's Avatar
Thread Starter
10 Second Club
iTrader: (4)
 
Joined: Aug 2006
Posts: 146
Likes: 0
From: macclenny florida
Default

I do not have bolts for the underdrive pulley. And I do use paypal. My favorite method of payement.

-Thanks
Old Jan 3, 2007 | 12:44 PM
  #14  
vigalante LT1's Avatar
Thread Starter
10 Second Club
iTrader: (4)
 
Joined: Aug 2006
Posts: 146
Likes: 0
From: macclenny florida
Default

I am not sure actually. I purchased it as an all motor 3000 stall. The stall was really tight and it only stalled to about 2100rpms foot brake. So when I did the head swap I went with a bigger stall to compliment the setup more. It only has about 2000 miles on it.

-Thanks
Old Jan 3, 2007 | 12:46 PM
  #15  
porksoda's Avatar
TECH Addict
iTrader: (39)
 
Joined: May 2005
Posts: 2,458
Likes: 2
From: Clovis, NM
Default

I'll take the throttle body (pending pics)! You will have to wait till I'm off work though for payment. I just need pics of how the airfoil mounts in there. Is it the one that goes in the elbow or the one that bolts into the TB? Send pics to tupacs_alive2004@yahoo.com
Old Jan 3, 2007 | 12:55 PM
  #16  
vigalante LT1's Avatar
Thread Starter
10 Second Club
iTrader: (4)
 
Joined: Aug 2006
Posts: 146
Likes: 0
From: macclenny florida
Default

It's just one that sits inside the elbow. It fit great inside my stock elbow. I will snap some more pics when I get home from work.

-Thanks
Old Jan 3, 2007 | 02:27 PM
  #17  
vigalante LT1's Avatar
Thread Starter
10 Second Club
iTrader: (4)
 
Joined: Aug 2006
Posts: 146
Likes: 0
From: macclenny florida
Default

Pulley Sold!!
Old Jan 4, 2007 | 06:54 AM
  #18  
vigalante LT1's Avatar
Thread Starter
10 Second Club
iTrader: (4)
 
Joined: Aug 2006
Posts: 146
Likes: 0
From: macclenny florida
Default

Morning Bump!!
Old Jan 5, 2007 | 07:08 AM
  #19  
vigalante LT1's Avatar
Thread Starter
10 Second Club
iTrader: (4)
 
Joined: Aug 2006
Posts: 146
Likes: 0
From: macclenny florida
Default

Morning Bump!!
Old Jan 6, 2007 | 04:30 PM
  #20  
vigalante LT1's Avatar
Thread Starter
10 Second Club
iTrader: (4)
 
Joined: Aug 2006
Posts: 146
Likes: 0
From: macclenny florida
Default

Bump!!
 




All times are GMT -5. The time now is 11:12 PM.