OK should have the rest of the bolts tonight and getting the car back together. I'll get some pics after I clean it up and get it put back together. The pollen down here is BAD and even my underhood is yellow.

From what I can come up with, it is going to be about $50 for everything here:
Hood strut brackets
Hood latch(core support)
Hood latch(hood)
Hood safety latch
Bumper bracket
Fender bolts
Headlight brackets
Computer bracket
Fuel rail to intake bolts
Throttle body bolts
IAC bolts
TPS bolts
Air box bolts
Core support grounds (2)
Throttle cable bracket
EGR bolt
Coil pack bolts
MAF ends

And if you want the intake bolts I'll be more than happy to run over and order more for you, but the intake bolts are about $4 a piece, so with those you're looking at $90.

Prices are shipped.

If anyone can see what thread and length the bolts are on their hood struts, safety latch, and hood latch on their stock hood I would really appreciate it. I have an ASCD hood and everything on there is a standard thread. I'm thinking that the factory hood uses a M6 on the struts and safety latch and an M8 on the hood latch.

I'm just trying to get rid of my stock of parts since I bought in bulk to get mine together. I'll have them all tagged and bagged for you, too.

 

Back to the top. I should have pictures tonight after I finish putting my car back together.

 

Shoot me a pm when you get the pics up, i really interested, in this kit.

 

http://s97.photobucket.com/albums/l2...Powdercoating/

Pics of my engine bay with them

 

bump for the morning

 

Bump for you...good price for stainless bolts.

 

Interested... is this a kit you are going to sell or is it just this one?

 

I've got a ton of bolts left, so there should be at least 5 or 6 kits here. I've sold one already, but I've got more.

 

Bump it, got a few left!

 

Two more left!

 

one more!