.. hopefully youll hear back from me before these are gone 
Pavlock Performance LCA'S & PHB FS!!
Pavlock Performance LCA'S & PHB bulk sale!! THE SPECIAL IS OVER BUT THESE ARE STILL PRICED TO SELL!!
Our PHB's and LCA's are made from the highest quality Billit Aluminum for strength and longivity. They will handle the roughest road courses and dragstrips to daily driven abuse! They come ready to install with machined flats to easily adjust by wrench and they are fully "on the car" adjustable for quick adjustments on the road or in between rounds! It weighs in at only 3.75 LBS a side for the LCA and 3.75 LBS for the PHB with a great polished finish!!
They will come "pre-set" to OEM locations to position you back to stock locations and than can be on-car adjusted for fine tuning.
99.00 for the PHB
179.00 for the LCA
If you need further help please do not hesitate to ask.
Due to the case where demand is high, please allow 1 week to deliver!
Our PHB's and LCA's are made from the highest quality Billit Aluminum for strength and longivity. They will handle the roughest road courses and dragstrips to daily driven abuse! They come ready to install with machined flats to easily adjust by wrench and they are fully "on the car" adjustable for quick adjustments on the road or in between rounds! It weighs in at only 3.75 LBS a side for the LCA and 3.75 LBS for the PHB with a great polished finish!!
They will come "pre-set" to OEM locations to position you back to stock locations and than can be on-car adjusted for fine tuning.
99.00 for the PHB
179.00 for the LCA
If you need further help please do not hesitate to ask.
Due to the case where demand is high, please allow 1 week to deliver!
Last edited by Pavlock Performance; Sep 12, 2007 at 07:44 PM.
You will notice a little noise but the LCA's will def. add strength to your chassis. It will be less forgiving than a typical factory rubber bushing and even a poly bushing. I highly doubt that anything will break on your car 
If anything does break it will be your stock 10 bolt which will not be because of the suspension.
If anything does break it will be your stock 10 bolt which will not be because of the suspension. Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Joined: Sep 2004
Posts: 2,447
Likes: 6
From: Grand Junction, CO / Tomball, TX
I got the set when Bryan first started making them, after weighing my stock stuff against his I saved 9lbs altogether. As for gains the car does hook a little better and launches more evenly.
Originally Posted by Dustin
I got the set when Bryan first started making them, after weighing my stock stuff against his I saved 9lbs altogether. As for gains the car does hook a little better and launches more evenly.
Glad to hear they are working out for you!
Originally Posted by black_z
Hey Bryan, I didn't see anything on the site regarding shipping. I would like one of your PHB's, should I just send the 89.95 to your paypal, or is there a shipping charge? Thanks.
NeddATA: shipping is a flat $9.95
davidfre21: Poly bushings are in the works for a steal version soon. most people wanted full adjustable so i do the rod end versions.
davidfre21: Poly bushings are in the works for a steal version soon. most people wanted full adjustable so i do the rod end versions.
