I have a complete set of LS1 brakes (includes... 1 set front calipers and brackets, 1 set or rear calipers and brackets and 1 set of rear backing plates)

$200 obo

I also have another spare set of Front calipers, no mounting brackets.

$100 obo

Ls1 brake conversion for s-10 truck, has modified spindles and custom hubs to fit a camaro hat rotor...I have adapter brackets to use the calipers listed above.

$100 obo

3 sets of heads...2 perimeter bolt and 1 center bolt.

$80 a set.

1 set of new 915 springs...never used SOLD

Plenty of stock springs, pushrods...let me know what you need.

New Front QA-1 coil overs for a s-10 truck,monte carlo etc..... $400 obo

New rear QA-1 coil overs...universal $400 obo...all shocks have never been used

1 set of universal ladder bars...installed but not used. will need new brackets because they have been welded to my frame. $100 obo

New stock oil pump $50

Used ls1 f-body a/c compressor $75 obo

knock sensor harness SOLD

6.0 truck oil pan $75 obo

78mm TB $75 obo

New stock ls1 head bolts $20 obo

Corvette a/c bracket w/ tensioner $50 obo

Ls1 centerforce dual-friction pressure plate $50 obo

I have a few good stock clutches, pressure plates, and flywheels...let me know what you need.

T-5 transmission for a 2.8l s-10 truck complete with new clutch assembly and flywheel $100

I have tons of LS1 gaskets...let me know what you need

all items are without shipping

Thanks,
Brian
urtracing@yahoo.com

 

no takers?

 

Do you happen to have the knock sensors and harness? Also what about intake,tb, or bellhousing bolts?

 

Im looking for an ls7 clutch

 

not sure about the sensors or harness...have to check. Possible on the bolts.
I have the intake and tb...$100 shipped for both of those..throw the bolts in if I have them. No on the LS7 clutch.

 

I don't have the bolts but I do have the harness...i'll throw it in with the intake and tb if you want them.

my paypal is:

urtracing@yahoo.com

 

anyone?

 

I dont need the intake. How much for the knock sensor harness?

 

How about $15 shipped?

 

Sounds good. I will paypal you tomorrow morning

 

Sure thing...i'll get it ready to ship...

 

The Comp 915 beehive spring? I'll take them..

 

I have another guy wanting them but money talks...I told him it's first come first serve.
$55 shipped

paypal is: urtracing@yahoo.com

nothing is considered sold untill I have money for it.

Thanks,
Brian

 

I hate to step on toes but i sent money. Just let me know if you can ship them tomorrow or reject payment. My heads are about to get a valvejob done within a couple days so I kinda need to know.

 

Not a problem.

Thanks,
Brian

 

have a 98 flexplate by chance? do you know if i can use that truck oil pan on my 2000 f-body ls1? it is going in a 79 1/2 ton truck.

 

I don't have any flexplates. As far as the oil pan goes...you will probably have to use a truck pan....most swaps require them because of the more traditional style like a SBC pan.

 

Knock sensor harness is sold.

 

do you have the pickup tube and windage tray for the pan too?

 

yes i do.