ATI Intercoolers, Comp, th350, 42lb, BMR, MTI, NOS, O2 sims, skip shift, etc...
Comp 918/Ti Retainers + Roller rockers, th350, BMR loop, NOS, skip shift NIB = New In Box rest are USED, parts have no warranty and are as is. Will leave trader ratings and expect same from buyers all parts in IL, 62863. Sold items now at bottom of page.
3. Skip shift, think its a hypertech but not sure on brand but was a name brand, USED: $12 shipped!
4. Comp TI retainers and 918 springs both NIB: Comp wants $300 for these retainers # 772-16 Byunspeed was $275. $260 shipped for both!
5. Comp ProMagnum Roller rockers NIB 3/8" studs 1.6 self aligning bought for Vortec/SBC engine probably fits many other apps. Comp description says: Chevrolet V8 1988 & Later with self aligning rockers Rocker Stud: 3/8 Ratio: 1.6
# 1318-16 linky http://www.compperformancegroupstore...Category_Code= $265 shipped!
8. ARP SBC head bolts #134-3601 Hex bolt NIB: $50 shipped!
9. BMR DS loop Red USED bottom nice top some scratches from install: $60 shipped!
10. 1350 U-Joint bought from Strange for $45 has no drilled grease zerk fitting hole for strength #5-447X NIB: $20 shipped!
12. Air filter kit, Looks exactly like K&N round. Came with Mustang Vortec kit NIB with Mustang 93 down bracket 3.5" inlet 6" x 6" roughly $30 shipped!
14. 4.030" C&A ZGS file fit piston rings top and 2nd ring never filed never installed etc 5/64" Ductile ZG and Ductile Moly 4.035(.005 for filing to fit), NO oil rings, NO oil rings, No oil rings: $75 shipped!
15. Nitrous kit NOS USED, without fogger nozzel, jets or throttle switch. Older, forgot i had this, I had the bottle hydro tested as a spare years back and not filled after. Powershot solenoids, 10lb bottle has brackets: $135 shipped!
16. Rajay/Tial wastegate stainless flange with gaskets, This thing doesnt have the 38mm bore, more like 0.9" would have to be enlarged to accomodate 38mm but same flange. 2 gaskets included: $10 shipped!
17. Aircraft covered toggle switch 40 amp 3 NIB 1 new out for inspection: $40 shipped!
18. TH350 TCI streetfighter trans with TCI streetfighter 3800-3600 stall converter USED less than 1k miles behind mild/medium tune 400. NOT LS1 converter regular SBC mount 6 lug short tail: Pickup/meet $450
SOLD ITEMS
1. Holding till 17th.
1.5 ATI Procharger Aluminum Plenum: SOLD v8juice
2. O2 sims LS1, Square plug, didnt use them, were in sealed box and appear NIB: SOLD rking
6. 42LB Lucas injectors USED 5 miles #'s on body: 3188, 621031, D3181AA: SOLD bshell
7. Hurst Billet plus M6 (not factory hurst shifter) F Body shifter with bolts & boot very nice: SOLD curt96ws6
11. MTI lid black, used with coupler to MAF. Has a few chem fingerprints from previous owners(picture doesnt show them well), maybe polish or paint over: SOLD qwik_ss
13. Decided to keep for now
19. Y pipe sold local.
3. Skip shift, think its a hypertech but not sure on brand but was a name brand, USED: $12 shipped!
4. Comp TI retainers and 918 springs both NIB: Comp wants $300 for these retainers # 772-16 Byunspeed was $275. $260 shipped for both!
5. Comp ProMagnum Roller rockers NIB 3/8" studs 1.6 self aligning bought for Vortec/SBC engine probably fits many other apps. Comp description says: Chevrolet V8 1988 & Later with self aligning rockers Rocker Stud: 3/8 Ratio: 1.6
# 1318-16 linky http://www.compperformancegroupstore...Category_Code= $265 shipped!
8. ARP SBC head bolts #134-3601 Hex bolt NIB: $50 shipped!
9. BMR DS loop Red USED bottom nice top some scratches from install: $60 shipped!
10. 1350 U-Joint bought from Strange for $45 has no drilled grease zerk fitting hole for strength #5-447X NIB: $20 shipped!
12. Air filter kit, Looks exactly like K&N round. Came with Mustang Vortec kit NIB with Mustang 93 down bracket 3.5" inlet 6" x 6" roughly $30 shipped!
14. 4.030" C&A ZGS file fit piston rings top and 2nd ring never filed never installed etc 5/64" Ductile ZG and Ductile Moly 4.035(.005 for filing to fit), NO oil rings, NO oil rings, No oil rings: $75 shipped!
15. Nitrous kit NOS USED, without fogger nozzel, jets or throttle switch. Older, forgot i had this, I had the bottle hydro tested as a spare years back and not filled after. Powershot solenoids, 10lb bottle has brackets: $135 shipped!
16. Rajay/Tial wastegate stainless flange with gaskets, This thing doesnt have the 38mm bore, more like 0.9" would have to be enlarged to accomodate 38mm but same flange. 2 gaskets included: $10 shipped!
17. Aircraft covered toggle switch 40 amp 3 NIB 1 new out for inspection: $40 shipped!
18. TH350 TCI streetfighter trans with TCI streetfighter 3800-3600 stall converter USED less than 1k miles behind mild/medium tune 400. NOT LS1 converter regular SBC mount 6 lug short tail: Pickup/meet $450
SOLD ITEMS
1. Holding till 17th.
1.5 ATI Procharger Aluminum Plenum: SOLD v8juice
2. O2 sims LS1, Square plug, didnt use them, were in sealed box and appear NIB: SOLD rking
6. 42LB Lucas injectors USED 5 miles #'s on body: 3188, 621031, D3181AA: SOLD bshell
7. Hurst Billet plus M6 (not factory hurst shifter) F Body shifter with bolts & boot very nice: SOLD curt96ws6
11. MTI lid black, used with coupler to MAF. Has a few chem fingerprints from previous owners(picture doesnt show them well), maybe polish or paint over: SOLD qwik_ss
13. Decided to keep for now
19. Y pipe sold local.
Last edited by Public; Nov 3, 2007 at 08:40 PM. Reason: updates
Trending Topics
Originally Posted by Public
All parts stored in climate controlled building. NIB = New In Box rest are USED, parts have no warranty and are as is. Will leave trader ratings and expect same from buyers all parts in IL, 62863.
1. ATI Procharger 3.5" LS1 intercooler F body kit includes polished ALUMINUM PLENUM (ATI sticker very nice shape, Flash on camera does the plenum no justice)and proper aluminum ATI radiator support with all pipes hoses and couplers to the MAF from the Y at supercharger except BOV (whats in the picture only). Intercoolers have NO rock dings and look awesome. Rubber couplers and hoses look excellent. Comes with ATI manual. Removed by EPP and been in box since, USED. Great ATI or STS upgrade. $500
1. ATI Procharger 3.5" LS1 intercooler F body kit includes polished ALUMINUM PLENUM (ATI sticker very nice shape, Flash on camera does the plenum no justice)and proper aluminum ATI radiator support with all pipes hoses and couplers to the MAF from the Y at supercharger except BOV (whats in the picture only). Intercoolers have NO rock dings and look awesome. Rubber couplers and hoses look excellent. Comes with ATI manual. Removed by EPP and been in box since, USED. Great ATI or STS upgrade. $500
Originally Posted by bshell
Got the injectors today!
Comp cams 918 springs and Ti retainers fits stock heads still available and priced right. Comp pimp roller rocker still their to.
Aluminum ATI procharger air plenum has been SOLD/shipped awaiting plastic replacement for ATI kit so its in flux till then and reduced to $400 shipped.
