I just bought an LS6 Intake, and just found out that it has the provisions for AIR/EGR. I have already deleted my air/egr for my race headers so my question is is there anyway for me to use this intake??


WARNING GO TO SECOND PAGE!!!! WAS SCAMMED!!!

 

go to autozone and buy a freeze plug, i deleted my egr and i used that to fill the hole

 

i thought they didnt have the EGR stuff on them? mine didnt.

whats the part number on it.

 

i think its a 1 3/8" or a 1 3/4" freeze plug

 

I didn't think the LS6 had EGR nether, Better check the part number !!

 

i have never seen an ls6 with the egr setup on it the only ones i know of are stock ls1 intakes

 

yeah they make the ls6 with the provisions but i hope he checked the pt# before he bought it

 

slp sells em

 

It might be a SLP LS6 intake, those came with the EGR provision. What you need is to post the part number off the manifold.

 

You can get them either way from SLP.

 

Actually now that I think of it all you have to do to verify if its an LS6 is look at the underside of the manifold.
Flat= LS6
Concave= LS1

 

Since it's been beaten like a dead horse that you can get them with EGR I will save my comment. I don't think there are any AIR provisions on an intake manifold, or at least nothing that changes. Air is that Jarvik 7 looking thing in the rear of the engine bay and the tubes that go to the headers that comprise the system. Post up part #.

-J

 

The guy i bought it from bought it with the egr provisons already installed (speed inc sells them) I beleive its an SLP product.

 

is the bottom flat or not?

 

Heres the pic he sent me.

Link to his sale thread...
https://ls1tech.com/forums/lsx-parts-sale/794930-ls6-intake-painted-black-275-plus-paypal-must-sell.html

 

I don't see an EGR. Bottom looks flat, from the pics it def looks like an LS6. Good buy!

-J

 

Ls6, I dont see the EGR hole either.

 

Thats what i thought, why would he say he has air/egr provisions?? Something doesn't add up...

 

So what part do you think is EGR? That is a non EGR LS6 intake.

 

My only thought is that he mixed up what was/is EGR/AIR. If the bottom wasn't flat it'd be a corvette LS1 intake, but since it's flat, I'd say just don't think about it and enjoy the part If you really want to put it all to sleep, post a P/N here.

-J