H/S rockers, Isky tools, hump-mount & more...
#1
Thread Starter
Restricted User
iTrader: (207)
Joined: Aug 2005
Posts: 555
Likes: 0
From: jacksonville, fl.
H/S rockers, Isky tools, hump-mount & more...
have a few extra things laying around and i could use the $$$ right now.
Harland Sharp 1.7 non-adjustable rockers. they have about 800 miles on them. they will be off the car later today or tomorrow. i will post pics as soon as i get the covers off.....SOLD
Isky fly-cutting tools. they have been used on 3 motors to make piston cuts. 1 5/8 - 2 1/16 - pilot shaft and extra set screws.....SOLD
f-body bottle hump-mount..... SOLD
ashtray nitrous switch (new)..... SOLD
QTP lift plate. used it on one pull and replacement.....SOLD
tps switch.....$15.00 shipped
trick flow 7.0 pushrods.....$40.00 shipped
intake and exhaust valve seals.....$20.00 shipped
please shoot me a pm if you have any questions or are in need of more pics. i work nights and will get back to you asap.
all prices are shipped to the U.S.A. paypal is preferred.
Harland Sharp 1.7 non-adjustable rockers. they have about 800 miles on them. they will be off the car later today or tomorrow. i will post pics as soon as i get the covers off.....SOLD
Isky fly-cutting tools. they have been used on 3 motors to make piston cuts. 1 5/8 - 2 1/16 - pilot shaft and extra set screws.....SOLD
f-body bottle hump-mount..... SOLD
ashtray nitrous switch (new)..... SOLD
QTP lift plate. used it on one pull and replacement.....SOLD
tps switch.....$15.00 shipped
trick flow 7.0 pushrods.....$40.00 shipped
intake and exhaust valve seals.....$20.00 shipped
please shoot me a pm if you have any questions or are in need of more pics. i work nights and will get back to you asap.
all prices are shipped to the U.S.A. paypal is preferred.
Last edited by WS6nJAX; 01-15-2008 at 12:04 PM.
Trending Topics
#14
Thread Starter
Restricted User
iTrader: (207)
Joined: Aug 2005
Posts: 555
Likes: 0
From: jacksonville, fl.
not sure on your set-up. on another build i had the adjustables and i had to grind a couple spots on the inside of my covers. on my recent build i went with aftyermarket covers and there never was a problem. i have also seen where folks have had to grind the rockers to make them work.
#15
I recv'd the Nitrous mount and Nitrous switch. Thanks for the fast shipping. Everything was exactly as advertised.
I left feedback for you....If you would please take a second and do the same for me, I would appreciate it.
Thanks again!
Paul
I left feedback for you....If you would please take a second and do the same for me, I would appreciate it.
Thanks again!
Paul