It's been a while since I have dealt in the 4th gen. world.
I used to sell a lot of parts here and at DFWls1.
I just consolidated the rest of what I have and I will take $100.00 for everything, but you have to come pick it up.
If I don't have anyone take me up on the whole lot, then I will start pricing everything out seperately. I have parted out 2-98 Z28's, and 1-99 SS, and this is what is left.
2-rear calipers with brackets and lines
1-rear backing plate for a 10 bolt
1-set of rear brake lines that bolt onto the rear end with brackets
4-front rotors
1-rear rotor
4-front hubs with wire harnesses (1-has cracked plastic)
1-ABS module w/ res., and brake booster and hard lines
1-A/C condensor w/ plastic piece
1-set of plastics that go with the radiator/condensor
2-cruise control set ups with cables
2-windshield wiper motors
2-sets of wiper arms and the linkages under bezel
2-ERG blower motors
misc. front fender mounting brackets
1-stock "Y" pipe with cats and o2 sensors
2-front hood latch brackets (2 pieces per set)
several hood latch cables/pulls
1-set of rear springs
1-set of rear shocks
2-stock bellows (1-has sensor)
2-sets of fuel tank straps
1-integrated body control module
1-Bosch throttle position controller
1-air bag module
1-stock impact sensor (for the alarm)
1-batt. tray/coolant res.
1-set of brake lines (long from front to rear)
1-set of brake/fuel lines (long from front to rear)
1-set of ls1 heater hoses
1-inline power steering cooler
1-complete rear hatch (teal z28)
1-complete door (teal)
1-drivers side door glass
1-batt. power wire harness
1-front sway bar (no brackets)
1-LCA
2-pan hard bars
3-upper a-arms w/ strut brackets
2-upper a-arms
1-upper strut bracket
several sets of sill plates (int. pieces above rocker moldings)
1-set of tan kick panels
1-set of t-top holders (grey)
several sets of all of the panels that go under the dash
3-glove box doors
several upper int. light pods
1-tan leather door panel
2-sets of rear carpet trunk liners
2-package tray lids
1-set of tan rear int. panels w/speakers
1-pass. side large (middle) tan int. panel (w/out speaker)
2-grey "A" pillar panels (t-top)

This is it.
Please be patient with me, if I get hamered with questions.
Thanks for everything,
Scott

 

were are you at in Texas?

 

NW of ***.
Thanks

 

Wow, that was weird.
NW of Fort Worth.

 

how are the front rotors? have they ever been turned?

 

WOW! Awsome deal. Wish I lived closer.

If ou look in the parts wanted section, there is someone who is giving $130 shipped for a set of cats with the core intact. I think he buys them to recycle.

Re'

 

theres a guy here that will buy ur cats for 140$ for both

 

They don't appear to have been turned, but I would recomend it.
There is still plenty of material there.
Thanks.

 

So no one is interested?
TTT

 

im interested... i live in the colony... which city exactly are you in?

 

I now have all these parts in possesion except for the hatch... so if you are in need of any please pm me...

 

what year is the batt. power wire harness from?

it would require shipping to get to me, if thats ok. could you send a pic to steve_davidson14@hotmail.com

thanks
steve

 

not sure what year... either 98 or 99... im going to get you a pic... also theres a part where there's a cut in the insulation and a few of the wires inside are split... you can def. still salvage it with some good ol' electrical tape around it... i will give it to ya for 5 bucks plus shipping... i can put it in a flat rate for like 9 bucks... so around 14 bucks... let me know if you still want the pics

 

yeah, please send the pic.

 

message sent... let me know if they came out alright or if you need better ones...

 

btw i noticed you are in canada so a flat rate box will not work... i will let you know how much i costs to ship to canada.. but i assume it will be a bit more as im sure you are used to

 

Im interested in these. also in n. ft worth area.
is the air dam pc included with the plastics?

 

i will check into all that, but i have another guy looking at the coolant resevoir/battery tray... all the parts are locked up in my shed so i will check tomorrow

 

Thanks Bullet WS6 for getting all of the stuff.
I will not be checking this site for a LONG time, so if you need anything from just give me a call.

BTW Bullet WS6 was great to deal with.

Maybe I'll see you guys when I start working on my 69 again.

Later,
Scott