Huge Stock Parts Lot $100.00
#1
Teching In
Thread Starter
iTrader: (14)
Join Date: Feb 2004
Location: Texas
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
It's been a while since I have dealt in the 4th gen. world.
I used to sell a lot of parts here and at DFWls1.
I just consolidated the rest of what I have and I will take $100.00 for everything, but you have to come pick it up.
If I don't have anyone take me up on the whole lot, then I will start pricing everything out seperately. I have parted out 2-98 Z28's, and 1-99 SS, and this is what is left.
2-rear calipers with brackets and lines
1-rear backing plate for a 10 bolt
1-set of rear brake lines that bolt onto the rear end with brackets
4-front rotors
1-rear rotor
4-front hubs with wire harnesses (1-has cracked plastic)
1-ABS module w/ res., and brake booster and hard lines
1-A/C condensor w/ plastic piece
1-set of plastics that go with the radiator/condensor
2-cruise control set ups with cables
2-windshield wiper motors
2-sets of wiper arms and the linkages under bezel
2-ERG blower motors
misc. front fender mounting brackets
1-stock "Y" pipe with cats and o2 sensors
2-front hood latch brackets (2 pieces per set)
several hood latch cables/pulls
1-set of rear springs
1-set of rear shocks
2-stock bellows (1-has sensor)
2-sets of fuel tank straps
1-integrated body control module
1-Bosch throttle position controller
1-air bag module
1-stock impact sensor (for the alarm)
1-batt. tray/coolant res.
1-set of brake lines (long from front to rear)
1-set of brake/fuel lines (long from front to rear)
1-set of ls1 heater hoses
1-inline power steering cooler
1-complete rear hatch (teal z28)
1-complete door (teal)
1-drivers side door glass
1-batt. power wire harness
1-front sway bar (no brackets)
1-LCA
2-pan hard bars
3-upper a-arms w/ strut brackets
2-upper a-arms
1-upper strut bracket
several sets of sill plates (int. pieces above rocker moldings)
1-set of tan kick panels
1-set of t-top holders (grey)
several sets of all of the panels that go under the dash
3-glove box doors
several upper int. light pods
1-tan leather door panel
2-sets of rear carpet trunk liners
2-package tray lids
1-set of tan rear int. panels w/speakers
1-pass. side large (middle) tan int. panel (w/out speaker)
2-grey "A" pillar panels (t-top)
This is it.
Please be patient with me, if I get hamered with questions.
Thanks for everything,
Scott
I used to sell a lot of parts here and at DFWls1.
I just consolidated the rest of what I have and I will take $100.00 for everything, but you have to come pick it up.
If I don't have anyone take me up on the whole lot, then I will start pricing everything out seperately. I have parted out 2-98 Z28's, and 1-99 SS, and this is what is left.
2-rear calipers with brackets and lines
1-rear backing plate for a 10 bolt
1-set of rear brake lines that bolt onto the rear end with brackets
4-front rotors
1-rear rotor
4-front hubs with wire harnesses (1-has cracked plastic)
1-ABS module w/ res., and brake booster and hard lines
1-A/C condensor w/ plastic piece
1-set of plastics that go with the radiator/condensor
2-cruise control set ups with cables
2-windshield wiper motors
2-sets of wiper arms and the linkages under bezel
2-ERG blower motors
misc. front fender mounting brackets
1-stock "Y" pipe with cats and o2 sensors
2-front hood latch brackets (2 pieces per set)
several hood latch cables/pulls
1-set of rear springs
1-set of rear shocks
2-stock bellows (1-has sensor)
2-sets of fuel tank straps
1-integrated body control module
1-Bosch throttle position controller
1-air bag module
1-stock impact sensor (for the alarm)
1-batt. tray/coolant res.
1-set of brake lines (long from front to rear)
1-set of brake/fuel lines (long from front to rear)
1-set of ls1 heater hoses
1-inline power steering cooler
1-complete rear hatch (teal z28)
1-complete door (teal)
1-drivers side door glass
1-batt. power wire harness
1-front sway bar (no brackets)
1-LCA
2-pan hard bars
3-upper a-arms w/ strut brackets
2-upper a-arms
1-upper strut bracket
several sets of sill plates (int. pieces above rocker moldings)
1-set of tan kick panels
1-set of t-top holders (grey)
several sets of all of the panels that go under the dash
3-glove box doors
several upper int. light pods
1-tan leather door panel
2-sets of rear carpet trunk liners
2-package tray lids
1-set of tan rear int. panels w/speakers
1-pass. side large (middle) tan int. panel (w/out speaker)
2-grey "A" pillar panels (t-top)
This is it.
Please be patient with me, if I get hamered with questions.
Thanks for everything,
Scott
#6
TECH Fanatic
iTrader: (31)
Join Date: Apr 2007
Location: Dover DE
Posts: 1,207
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
WOW! Awsome deal. Wish I lived closer.
If ou look in the parts wanted section, there is someone who is giving $130 shipped for a set of cats with the core intact. I think he buys them to recycle.
Re'
If ou look in the parts wanted section, there is someone who is giving $130 shipped for a set of cats with the core intact. I think he buys them to recycle.
Re'
Trending Topics
#12
TECH Apprentice
iTrader: (18)
Join Date: Jan 2004
Location: windsor, on
Posts: 338
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
what year is the batt. power wire harness from?
it would require shipping to get to me, if thats ok. could you send a pic to steve_davidson14@hotmail.com
thanks
steve
it would require shipping to get to me, if thats ok. could you send a pic to steve_davidson14@hotmail.com
thanks
steve
#13
Teching In
iTrader: (1)
Join Date: Aug 2007
Location: Denton (DFW)
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
what year is the batt. power wire harness from?
it would require shipping to get to me, if thats ok. could you send a pic to steve_davidson14@hotmail.com
thanks
steve
it would require shipping to get to me, if thats ok. could you send a pic to steve_davidson14@hotmail.com
thanks
steve
#14
TECH Apprentice
iTrader: (18)
Join Date: Jan 2004
Location: windsor, on
Posts: 338
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
not sure what year... either 98 or 99... im going to get you a pic... also theres a part where there's a cut in the insulation and a few of the wires inside are split... you can def. still salvage it with some good ol' electrical tape around it... i will give it to ya for 5 bucks plus shipping... i can put it in a flat rate for like 9 bucks... so around 14 bucks... let me know if you still want the pics
#16
Teching In
iTrader: (1)
Join Date: Aug 2007
Location: Denton (DFW)
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
btw i noticed you are in canada so a flat rate box will not work... i will let you know how much i costs to ship to canada.. but i assume it will be a bit more as im sure you are used to
![Bang Head](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_banghead.gif)
#19
Teching In
Thread Starter
iTrader: (14)
Join Date: Feb 2004
Location: Texas
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Thanks Bullet WS6 for getting all of the stuff.
I will not be checking this site for a LONG time, so if you need anything from just give me a call.
BTW Bullet WS6 was great to deal with.
Maybe I'll see you guys when I start working on my 69 again.
Later,
Scott
I will not be checking this site for a LONG time, so if you need anything from just give me a call.
BTW Bullet WS6 was great to deal with.
Maybe I'll see you guys when I start working on my 69 again.
Later,
Scott