STS, Hidden LS6 Nitrous, ATI Intercoolers, stock shortblock, Custom Stereo, etc.
Thread Starter
TECH Regular
iTrader: (21)
Joined: Oct 2005
Posts: 479
Likes: 0
From: Santa Barbara, California
STS Rear Mount Turbo Kit. It has the upgraded GT67 turbo, and the TRT FMIC (Front Mount Intercooler for those who don't know). The kit has very few miles on it, at most a few k. I put down 440hp and 456ft/lbs at 6psi on a dynapack (I believe thats what Rick uses at Synergy). This was with a shitty slipping 4l60e tranny (that broke completely very shortly after). Car should make over 500/500 when upped to 8psi (which is safe with the intercooler on a stock block) with a conservative tune. Kit is still on the car but coming off very soon. I have also had the piping in the rear altered to not go over the axle and do all of that crazy junk, so its tucked nice, less bends, and less silicon couplers. I'll get pics up when there's a break in the rain. SOLD!!!.











LS6 Hidden Nitrous "Money Maker" Manifold. If you are looking for a truly hidden system this intake set up is for you. The mony maker system is designed and made by Nitrous Outlet. They have went through great trouble to keep the details on this intake a secret to protect the individuals that have invested into one. Please do not ask me for additional pictures of the manifold as I prefer to continue keeping this well kept secret. I can tell you this system is plumbed onto a LS6 intake that has been painted black. It will support from 50-300 HP. You supply the jets and solenoids of your choice. Remember that you are getting a painted LS6 intake WITH a hidden system for only a couple hundred more. The individual that purchases this intake will still receive full tech service from Nitro Dave when you let him know who bought it. SOLD!!!

ATI Twin Intercooler Kit. I purchased this ati twin intercooler kit here on the forums a while back. They were put on the car but never run. They look great. All included parts are shown in pics. Can't find merge pipe. $400 - Price Reduced.

LS1 Longblock. This is in my 2002 SS. It has roughly 60k miles on it, most of them were freeway miles. The car was my daily driver and never has been to the track. Engine has LS6 cam, LS6 Valley Cover, ported oil pump, LS2 timing chain, 160 thermostat, stock heads. The heads are off the car and do not include valvecovers, but do include the stock valves, rockers, pushrods, guidplates, retainers, springs. Heads have only 40k miles on them. Intake not included. $2000
Comp 918 Springs. These are the new version. Brand new still in box. $150

LS6 Valley Cover. Brand new in Box. GM#:12568002. SOLD


Other Stock Parts
Panhard Bar $25
LCA's $40
Sway Bars $75
Custom Stereo: https://ls1tech.com/forums/wiring-stereo-electronics/481873-anyone-interested-setup.html
Prices:
$1000 for custom box and amp rack
$2000 for custom box and amp rack loaded with subs and 3 amps
$5500 for entire setup with wiring
All prices are OBO and do not include shipping. Let me know if you need other pics or details. I am located in Santa Barbara CA. Payapal is preferred: iris3d@aol.com. Please add 3% to items over $200. I will be updating this as much as I can so look back for more parts.
I am also looking for High HP Fuel Stuff, Big Cube items, FI items. Let me know if you have something you're interested in trading.
LS6 Hidden Nitrous "Money Maker" Manifold. If you are looking for a truly hidden system this intake set up is for you. The mony maker system is designed and made by Nitrous Outlet. They have went through great trouble to keep the details on this intake a secret to protect the individuals that have invested into one. Please do not ask me for additional pictures of the manifold as I prefer to continue keeping this well kept secret. I can tell you this system is plumbed onto a LS6 intake that has been painted black. It will support from 50-300 HP. You supply the jets and solenoids of your choice. Remember that you are getting a painted LS6 intake WITH a hidden system for only a couple hundred more. The individual that purchases this intake will still receive full tech service from Nitro Dave when you let him know who bought it. SOLD!!!
ATI Twin Intercooler Kit. I purchased this ati twin intercooler kit here on the forums a while back. They were put on the car but never run. They look great. All included parts are shown in pics. Can't find merge pipe. $400 - Price Reduced.
LS1 Longblock. This is in my 2002 SS. It has roughly 60k miles on it, most of them were freeway miles. The car was my daily driver and never has been to the track. Engine has LS6 cam, LS6 Valley Cover, ported oil pump, LS2 timing chain, 160 thermostat, stock heads. The heads are off the car and do not include valvecovers, but do include the stock valves, rockers, pushrods, guidplates, retainers, springs. Heads have only 40k miles on them. Intake not included. $2000
Comp 918 Springs. These are the new version. Brand new still in box. $150
LS6 Valley Cover. Brand new in Box. GM#:12568002. SOLD
Other Stock Parts
Panhard Bar $25
LCA's $40
Sway Bars $75
Custom Stereo: https://ls1tech.com/forums/wiring-stereo-electronics/481873-anyone-interested-setup.html
Prices:
$1000 for custom box and amp rack
$2000 for custom box and amp rack loaded with subs and 3 amps
$5500 for entire setup with wiring
All prices are OBO and do not include shipping. Let me know if you need other pics or details. I am located in Santa Barbara CA. Payapal is preferred: iris3d@aol.com. Please add 3% to items over $200. I will be updating this as much as I can so look back for more parts.
I am also looking for High HP Fuel Stuff, Big Cube items, FI items. Let me know if you have something you're interested in trading.
Last edited by LastBlack02SS; Feb 17, 2008 at 11:58 PM.
Trending Topics
Thread Starter
TECH Regular
iTrader: (21)
Joined: Oct 2005
Posts: 479
Likes: 0
From: Santa Barbara, California
I have a Racetronix 255 with hotwire and a set of 42# injectors that I can put into a package deal if you are interested. With those all you'd need to add is a tune. PM me if you are interested and I'll do a package deal.
hey man. i wanna get the 918 springs from you for sure if you still got them. just curious about the shipping to 38771 if you could get that info for me i'll get you the money thru papal in the morning... (not trying to jump into anybody else's way asking about these but...) also i saw where you were talking about some 42# injectors, would those go right in on my 04 gto w/ 5.7?? dont know what yours came out of and wondering if you wanted to sell them too if i could afford them right now...
Thread Starter
TECH Regular
iTrader: (21)
Joined: Oct 2005
Posts: 479
Likes: 0
From: Santa Barbara, California
birddawg, springs still for sale and you'd be first in line. Had offers but nobody firm yet so if you want them they're yours. I'll get you shipping info tomorrow morning. I believe the injectors would fit. Best bet would be to check the Fuel Section, but I believe they will. I'll PM you a price in the morning for that as well.

