Gauging Interest: Stock LS6 parts.
F/S: LS6 Intake, LS6 Heads, T.B., and more... With Pics I am going to be doing a heads and cam swap after putting the Kenne Bell on last year.
I finally got around to selling some of my stock 2002 LS6 ZO6 parts.
They might just be the cleanest, non new, parts on the forums.
First is the 243 LS6 stock heads, they are still on the car and have never been removed. I hope to be ready to remove the heads in a week or two.
If you are in a hurry for these parts it could be sooner.
Car runs great and strong so there should not be any problems with them.
They will come fully assembled with the stock yellow springs, the lightweight sodium filled valves, and stock pushrods, if needed.
The heads have 44,xxx miles on them.
I am asking $500 +shipping OBO. SOLD
Next is the LS6 intake manifold it has been off the car since the KB install. It has around 40,xxx miles on it.
Just the intake $340 shipped OBO SOLD
Stock fuel rails and stock 28.5lb ZO6 injectors together $60 shipped OBO SOLD
Stock ZO6 throttle body with motor. $70 shipped OBO
Next is the LS6 Valley Plate with all 10 bolts and seal. $70 shipped OBO SOLD
Last is the Red Halltech Stinger intake i believe only for the 2000-2004 Corvettes. It does not have the hole in the side for the IAT sensor.
It comes with a red silicone coupler that usually retails for $50 alone.
Probably has the largest filter on it that I have ever seen. Matches the red fuel rail covers perfectly.
I loved it but cannot use it with the KenneBell. I will do $170 shipped SOLD
I dont really post on this forum too much im more on the corvetteforum so my post #'s are obviously not high.
let me know if you have any questions or are interested in anything.
schenckbrian@hotmail.com
thanks,
Brian
I finally got around to selling some of my stock 2002 LS6 ZO6 parts.
They might just be the cleanest, non new, parts on the forums.
First is the 243 LS6 stock heads, they are still on the car and have never been removed. I hope to be ready to remove the heads in a week or two.
If you are in a hurry for these parts it could be sooner.
Car runs great and strong so there should not be any problems with them.
They will come fully assembled with the stock yellow springs, the lightweight sodium filled valves, and stock pushrods, if needed.
The heads have 44,xxx miles on them.
I am asking $500 +shipping OBO. SOLD
Next is the LS6 intake manifold it has been off the car since the KB install. It has around 40,xxx miles on it.
Just the intake $340 shipped OBO SOLD
Stock fuel rails and stock 28.5lb ZO6 injectors together $60 shipped OBO SOLD
Stock ZO6 throttle body with motor. $70 shipped OBO
Next is the LS6 Valley Plate with all 10 bolts and seal. $70 shipped OBO SOLD
Last is the Red Halltech Stinger intake i believe only for the 2000-2004 Corvettes. It does not have the hole in the side for the IAT sensor.
It comes with a red silicone coupler that usually retails for $50 alone.
Probably has the largest filter on it that I have ever seen. Matches the red fuel rail covers perfectly.
I loved it but cannot use it with the KenneBell. I will do $170 shipped SOLD
I dont really post on this forum too much im more on the corvetteforum so my post #'s are obviously not high.
let me know if you have any questions or are interested in anything.
schenckbrian@hotmail.com
thanks,
Brian
Last edited by quicksilverzo6; Jan 19, 2009 at 10:06 AM. Reason: sold, sold, sold
Cam Sold ZO6 cam is sold.
Payment received.
Keep the offers coming guys thanks.
I still have everything else for now.
Will try and post pictures of LS6 intake manifold today or tomorrow.
thanks,
B
Payment received.
Keep the offers coming guys thanks.
I still have everything else for now.
Will try and post pictures of LS6 intake manifold today or tomorrow.
thanks,
B
lol