MAP 04-07 CTS-V Trailing Arms, More Rubber...Again!
#1
Closed ex-Sponsor Account
Thread Starter
Join Date: Aug 2013
Location: Cottage Grove, MN
Posts: 252
Likes: 0
Received 0 Likes
on
0 Posts
MAP 04-07 CTS-V Trailing Arms, More Rubber...Again!
Based on recent demand we have decided to make another batch of our CTS-V trailing arms! General consensus seems to be that these trailing arms allow up to a 295 or 305 rear tire with 10" rims. Anything larger than that and you're looking at spacers and/or modifications to other components, please check out the tire size discussion threads below for additional information.
OEM Trailing Arm:
MAP Trailing Arm:
Full Disclosure: Development of these arms was done quite some time ago by a former MAP employee. We will try to answer fitment questions, etc. to the best of our abilities, but we we make no claims of being CTS-V wheel and tire experts Here are some resources from the previous group buy that may be of assistance:
MAP Trailing Arm Installation Guide
Installation tip: Filing the shock mount
Tire Size Discussion Threads:
http://www.cadillacforums.com/forums...ml#post2168996
http://www.cadillacforums.com/forums...ml#post2169312
http://www.cadillacforums.com/forums...ml#post2519720
OEM Trailing Arm:
MAP Trailing Arm:
Full Disclosure: Development of these arms was done quite some time ago by a former MAP employee. We will try to answer fitment questions, etc. to the best of our abilities, but we we make no claims of being CTS-V wheel and tire experts Here are some resources from the previous group buy that may be of assistance:
MAP Trailing Arm Installation Guide
Installation tip: Filing the shock mount
Tire Size Discussion Threads:
http://www.cadillacforums.com/forums...ml#post2168996
http://www.cadillacforums.com/forums...ml#post2169312
http://www.cadillacforums.com/forums...ml#post2519720
Last edited by maperformance; 10-28-2013 at 11:42 AM.
#3
Closed ex-Sponsor Account
Thread Starter
Join Date: Aug 2013
Location: Cottage Grove, MN
Posts: 252
Likes: 0
Received 0 Likes
on
0 Posts
Correct me if I'm wrong, but didn't you pay at least $325 for yours in the Creative Steel group buy? Did he provide dinner and a movie?
To the top!
To the top!
Trending Topics
#9
Closed ex-Sponsor Account
Thread Starter
Join Date: Aug 2013
Location: Cottage Grove, MN
Posts: 252
Likes: 0
Received 0 Likes
on
0 Posts
Our fabrication team has improved vastly so the fitting of the tube to the flex joint has a much nicer contour with additional surface area, not to mention the weld quality is second to none.
#11
Closed ex-Sponsor Account
Thread Starter
Join Date: Aug 2013
Location: Cottage Grove, MN
Posts: 252
Likes: 0
Received 0 Likes
on
0 Posts
#13
Closed ex-Sponsor Account
Thread Starter
Join Date: Aug 2013
Location: Cottage Grove, MN
Posts: 252
Likes: 0
Received 0 Likes
on
0 Posts
#15
Closed ex-Sponsor Account
Thread Starter
Join Date: Aug 2013
Location: Cottage Grove, MN
Posts: 252
Likes: 0
Received 0 Likes
on
0 Posts
The Joint is a very beefy pillow ball for a very ridgid fit so you wont start rubbing over time. There is also a zerk to grease them aswell.
#16
#18
Closed ex-Sponsor Account
Thread Starter
Join Date: Aug 2013
Location: Cottage Grove, MN
Posts: 252
Likes: 0
Received 0 Likes
on
0 Posts
#20
Closed ex-Sponsor Account
Thread Starter
Join Date: Aug 2013
Location: Cottage Grove, MN
Posts: 252
Likes: 0
Received 0 Likes
on
0 Posts