installed line lock w/ custome switch
#1
On The Tree
Thread Starter
iTrader: (4)
Join Date: Apr 2006
Location: BAY AREA, CA
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
installed line lock w/ custome switch
so the holidays have passed and i was left with a new SLP line lock. i did a little research on them and noticed that the main difference in the few out there was the wiring. so i redid the wiring on it to be a little safer. used a relay to power it. has a master on-off switch and a momentary to activate that. the switch is hot and the relay is the ground side. so if i have a short i should be ok...i think. i used an "ASR" switch for the momentary and replaced that orange light with a green led. the led is only on when the master switch is in the ON position. its nice and bright (not so much in the pic bc of the flash) so i can see if its left on. and the green stands out as theres nothing close to that color on the dash.
Last edited by funkymonkeys409; 12-29-2008 at 11:33 PM.