Ok, So I got the solobarics
#2
Staging Lane
Join Date: Mar 2005
Location: Englewood, CO
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
How do you plan on wiring them? Also, what type of box will you be putting it in?
If you wire them in parallel, it would yield a resistance of .5 ohms, which that amp is not stable at. And series would be 2 ohms. It really depends on how much you really want to run to these. 1500 watts should be enough for those though.
Edit: I believe the Orion 2500D is stable to below .5ohms
If you wire them in parallel, it would yield a resistance of .5 ohms, which that amp is not stable at. And series would be 2 ohms. It really depends on how much you really want to run to these. 1500 watts should be enough for those though.
Edit: I believe the Orion 2500D is stable to below .5ohms
Last edited by thaar; 10-17-2005 at 09:33 AM.
#3
TECH Addict
iTrader: (15)
Join Date: Sep 2005
Location: San Antonio, TX
Posts: 2,062
Likes: 0
Received 0 Likes
on
0 Posts
wire them in series at 2 ohms and that amp says it will put out 1500 watts at 2 ohms the L7 12s are 750 watts rms thats how i have mine and they hit hella hard im useing a rockford 1000.1 thats putting out 1500 watts and i love it
#4
TECH Apprentice
Thread Starter
iTrader: (1)
Join Date: Jul 2005
Posts: 354
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by thaar
How do you plan on wiring them? Also, what type of box will you be putting it in?
If you wire them in parallel, it would yield a resistance of .5 ohms, which that amp is not stable at. And series would be 2 ohms. It really depends on how much you really want to run to these. 1500 watts should be enough for those though.
Edit: I believe the Orion 2500D is stable to below .5ohms
If you wire them in parallel, it would yield a resistance of .5 ohms, which that amp is not stable at. And series would be 2 ohms. It really depends on how much you really want to run to these. 1500 watts should be enough for those though.
Edit: I believe the Orion 2500D is stable to below .5ohms
I only need it to hit hard and have enough juice (I will have 2 3-farad compacitors one for each sub) to hit hard and not bottom out / distort when I crank it up
#6
TECH Junkie
iTrader: (7)
Join Date: Aug 2004
Location: Prairie de Femme, LA
Posts: 3,809
Likes: 0
Received 0 Likes
on
0 Posts
caps are good up to a point, then they become a bandage. if you do go with caps, its usually .5 for every 500w. i have 1 10L7 with KX600.1 amp, and that thing hits like crazy. i can't imagine havin 2 12s.
#7
TECH Fanatic
iTrader: (7)
Join Date: Jun 2004
Location: Ventura County, California
Posts: 1,476
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Vax
both are dual coil 2 ohm
L7 12's
would this amp Be able to push them sufficiently? I'm going for hella hard hits on a budget hehe.
L7 12's
would this amp Be able to push them sufficiently? I'm going for hella hard hits on a budget hehe.
Trending Topics
#8
TECH Resident
iTrader: (11)
Join Date: Nov 2003
Location: El Cajon, CA
Posts: 996
Likes: 0
Received 0 Likes
on
0 Posts
Hifonics is junk compared to what it was in the late 80s-90s now its owned by a half *** company called maxxsonics similar to pyramid...Id run Kicker power, about the most decent you'll get for the cash...250-300 real watts a sub will jam....
Jeremy
Jeremy
#10
Originally Posted by 2MuchRiceMakesMeSick
Another vote for kicker. HIfonics arent what they use to be. There are alot of great amps out there for that price.
That is a sweet ride.
#11
TECH Apprentice
Thread Starter
iTrader: (1)
Join Date: Jul 2005
Posts: 354
Likes: 0
Received 0 Likes
on
0 Posts
Ok So itl ooks like I might go with the 2500D and the 800.4 amps by orion
along with 1 farad comp's on each (just for the thump gods sake )
but the big 3 are done in my car, the hatch, trunk, and others are being dynomatted (it's actually not dynomat, its somethign else but supposedly better stuff)
I'm ordering the box from sub thump tonight and probably the amps when I find a reliable place on ebay (or cheapest I can find outside source)
I'll be sure to post pics when it's done.
along with 1 farad comp's on each (just for the thump gods sake )
but the big 3 are done in my car, the hatch, trunk, and others are being dynomatted (it's actually not dynomat, its somethign else but supposedly better stuff)
I'm ordering the box from sub thump tonight and probably the amps when I find a reliable place on ebay (or cheapest I can find outside source)
I'll be sure to post pics when it's done.