Which amp for RE Audio SE10??
#1
Staging Lane
Thread Starter
iTrader: (8)
Join Date: May 2002
Location: Circleville, OH
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
Which amp for RE Audio SE10??
I'm going to switch out my JL Audio 10" sub from my stealthbox and try one of the new RE Audio SE10's. What would be the best amp for this woofer?
Also, if I were to add another stealthbox to the passenger side, what would be a good amp for 2 of these? Not sure if I'm going to stick with just one or go ahead and add another
Also, if I were to add another stealthbox to the passenger side, what would be a good amp for 2 of these? Not sure if I'm going to stick with just one or go ahead and add another
#2
TECH Addict
What impedance, or have you not ordered yet?
If dual 2: Planet Audio VX900D, Orion 600D,
If dual 4: Kicker ZX750.1, JBL GTO600.1, Kenwood KAC-X10D, Phoenix Gold RSD600.1
Bunch more, but that's what I saw on Ebay in a few pages of listings for good prices (and I didn't include any crap brands like Pyramid or Boss, etc)
If dual 2: Planet Audio VX900D, Orion 600D,
If dual 4: Kicker ZX750.1, JBL GTO600.1, Kenwood KAC-X10D, Phoenix Gold RSD600.1
Bunch more, but that's what I saw on Ebay in a few pages of listings for good prices (and I didn't include any crap brands like Pyramid or Boss, etc)
Last edited by dragonrage; 04-06-2008 at 10:40 AM.
#4
Staging Lane
Thread Starter
iTrader: (8)
Join Date: May 2002
Location: Circleville, OH
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
I have not ordered yet. I'll probably just stick with the 1 for now and thanks dragonrage for not including the crap brands I definately want a quality amp.
I checked out the Planet Audio VX900D seems pretty good. I'll definately consider that one. Kee, so which amp would you suggest for the single 10" dual 4ohm then? The 2 you listed or were those for the option of 2 10's?
Thanks guys!
I checked out the Planet Audio VX900D seems pretty good. I'll definately consider that one. Kee, so which amp would you suggest for the single 10" dual 4ohm then? The 2 you listed or were those for the option of 2 10's?
Thanks guys!
#5
Banned
iTrader: (65)
The 2 I listed would work with either a DVC 4ohm sub ran @ 2ohms or with 2 DVC 4ohm subs ran @ 1ohm as both amps are 1ohm stable. The RE Audio SE10 is rated 600watts RMS and 1200 peak power.
The RXD1000 is rated at 750W RMS @ 2 Ohms and 1000W RMS @ 1ohm for 2 subs.
The TQ-1201D is rated a little less but still would be able to push the SE10 at 500W RMS @ 2ohms and 900W RMS @ 1ohm if you chose to run 2.
The RXD1000 is rated at 750W RMS @ 2 Ohms and 1000W RMS @ 1ohm for 2 subs.
The TQ-1201D is rated a little less but still would be able to push the SE10 at 500W RMS @ 2ohms and 900W RMS @ 1ohm if you chose to run 2.
#6
11 Second Club
iTrader: (24)
I just recieved my 10" SE. They can take more than rated power. I got a great deal on a 1606 Hifonics I couldn't pass up that is a little overkill on a single or two 10's but I can turn it down. I got it for cheaper than a 1206 which is what I was going to buy before I found the new 1606 deal. I have a D4 10" and will work my way up to 800 Watts on it. Also received before I left to get my car a SubThump stealth for the driver's side which is very nice. Can't wait!