Replacing bulb in door handles
05-13-2008, 09:26 PM
#1
Replacing bulb in door handles My driver's side was fine but the passenger side was out when I had the panels off today. I tried to pull on the bulb with my fingers but it wouldn't budge. Does it twist out or something? Don't want to bust it and have nothing to hold on too.
Anyone know the number for it or where to get? Hopefully I don't have to buy a GM socket to get the bulb.
Anyone know the number for it or where to get? Hopefully I don't have to buy a GM socket to get the bulb.
05-13-2008, 10:46 PM
#2
I forgot the bulb number. (I stocked up on them a while ago and they don't have the number printed on them.) This site has a great look-up for bulbs: http://www.sylvania.com/ConsumerProd...lacementGuide/ Your local auto parts store will have the replacements. Just take an old one with you.
You remove the bulb... very carefully. I have used needle nose pliers in the past with mixed success. With a light hand/squeeze it will pull out of the socket. Do it too hard and it will shatter. Regardless - if it does shatter, it becomes easier to pull out.
That's probably not "advice" but more the way I have done it. There's got to be a better way. Maybe if you take a piece of duct tape, fold it in half over the end to make a tab and use the sticky parts to pull on the glass?
You remove the bulb... very carefully. I have used needle nose pliers in the past with mixed success. With a light hand/squeeze it will pull out of the socket. Do it too hard and it will shatter. Regardless - if it does shatter, it becomes easier to pull out.
That's probably not "advice" but more the way I have done it. There's got to be a better way. Maybe if you take a piece of duct tape, fold it in half over the end to make a tab and use the sticky parts to pull on the glass?
05-13-2008, 11:19 PM
#3
Staging Lane
Join Date: May 2007
Location: Greater Cincinnati
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
I am not sure of the number either and I just replaced mine or the driver side a few weeks ago. I had to pull it out and take it into the store for matching. As for pulling it out be very carefull like he said.. I used a need nose and cracked it. That little sucker was almost $4.00 if you can belive it.
05-14-2008, 12:08 AM
#4
TECH Resident
Join Date: Mar 2008
Posts: 771
Likes: 0
Received 0 Likes
on
0 Posts
I can't believe there is a thread on this..I just was at the dealer getting a new key fob today and I asked about the bulb on the drivers door.$6..No biggie,but I was wondering how it comes out too..I don't have one yet,but I was curious and someone asked before I did..Too funny..
Trending Topics
05-14-2008, 02:44 PM
#8
Yeah I would reccomend eBay for these bulbs. I found these:
http://cgi.ebay.com/ebaymotors/2-RED...m260238326944&
They're red and you can choose a bunch of colors. Two bulbs for $2.49
I haven't bought my WS6 yet (few days
) But where are these bulbs? Inside or outside?
http://cgi.ebay.com/ebaymotors/2-RED...m260238326944&
They're red and you can choose a bunch of colors. Two bulbs for $2.49
I haven't bought my WS6 yet (few days
) But where are these bulbs? Inside or outside?
05-14-2008, 02:49 PM
#9
I bought these LED's for a try:
http://cgi.ebay.com/ebaymotors/ws/eB...222739148&rd=1
#74's... thanks!
http://cgi.ebay.com/ebaymotors/ws/eB...222739148&rd=1
#74's... thanks!
05-15-2008, 08:26 PM
#15
05-15-2008, 08:43 PM
#16
No... you'd get purple! ...Or maybe pinky-violet... Check it out: (Take out the green.) http://www.omsi.edu/visit/tech/colormix.cfm
05-15-2008, 10:23 PM
#17
TECH Resident
iTrader: (3)
Join Date: Sep 2007
Location: Holmes County (thats right Amish Country), OHIO
Posts: 896
Likes: 0
Received 1 Like
on
1 Post
Shouldn't that OMSI site have the colors Blue Yellow and Red. Not green because you can make green with blue and yellow but you can't make Blue Yellow or Red
