Bolton 23-24 PSI NEON VS GTO, ADDED CHALLENGER RACE, cobra and another swapped neon.
#1
Bolton 23-24 PSI NEON VS GTO, ADDED CHALLENGER RACE, cobra and another swapped neon.
Was supposed to race a 03` Cobra, 01` cobra, bolton 350Z, and 2 srt4`s tonight. I raced the SRT4`s and a tiny run with the 03 cobra.
Ran the silver SRT4 swapped neon, bolton 22psi- 60 Roll I waited for his turbo to spool and hit it, he jumped half a car out, quickly reeled him in and then let off 3-4 cars ahead. 40 roll
Ran this same SRT4 in the VID first, 10 roll, nailed it even in first and went sideways, hit second and third, all sideways and tires screaming, let off 3-4 cars ahead, spinning all the way. He wanted a rematch
03 cobra and I hit it a little at a light, rolled out to 10 mph, both hit in first and instantly pulled a car tires spinning, hit second and cobra dropped out. CLutch cable nuts loosened and clutch wouldnt disengage so we didnt get the main feature on video :/
The Neon, Full boltons, pump gas on 23-24PSi, no passenger and weighs 2,800# WITH driver.
I weighed 4,050lbs for this race, myself and a 210lb passenger, full of fuel.
Pedaling my *** off!!!
Lolz, this challenger tried me to. Threw a rev at me, slid the corner out and fly by`d me. I waited for him to floor it, I am ASSUMING its an R/T, it is a V8 of some sort.
Ran the silver SRT4 swapped neon, bolton 22psi- 60 Roll I waited for his turbo to spool and hit it, he jumped half a car out, quickly reeled him in and then let off 3-4 cars ahead. 40 roll
Ran this same SRT4 in the VID first, 10 roll, nailed it even in first and went sideways, hit second and third, all sideways and tires screaming, let off 3-4 cars ahead, spinning all the way. He wanted a rematch
03 cobra and I hit it a little at a light, rolled out to 10 mph, both hit in first and instantly pulled a car tires spinning, hit second and cobra dropped out. CLutch cable nuts loosened and clutch wouldnt disengage so we didnt get the main feature on video :/
The Neon, Full boltons, pump gas on 23-24PSi, no passenger and weighs 2,800# WITH driver.
I weighed 4,050lbs for this race, myself and a 210lb passenger, full of fuel.
Pedaling my *** off!!!
Lolz, this challenger tried me to. Threw a rev at me, slid the corner out and fly by`d me. I waited for him to floor it, I am ASSUMING its an R/T, it is a V8 of some sort.
Last edited by Cwarta; 01-19-2013 at 03:04 PM.
#7
TECH Enthusiast
iTrader: (7)
Join Date: Jan 2011
Location: north dakota
Posts: 741
Likes: 0
Received 0 Likes
on
0 Posts
That weight is alittle high for a 1st gen depending on year and options and low for a srt-4. My base model 1st gen weighed just over 2300 full interior. And my brothers srt-4 weighed around 3200 fill interior.
Trending Topics
#8
I dont know much about these cars, but on 23-24psi anybody know how much power its putting down? I feel like it ran really well for a bolton car!
Man I know, BIG time. I have 275/40.18`s out back, I need something sticky though.
Ya I really Like the 2 tone paint on this car, it looks and sounds good! His car is P/I/E so He was wanting a run bad, and was PISSED his cable came loose...
Thats the weight he claimed, and I called him a light bastard and he laughed at me haha! Ya he was brake boosting, and we had one of the most perfect even hits I have ever seen.
#11
Staging Lane
cwarta what are your mods? those times correct in your sig? Nice kill btw. I found the thread on there SRT website when I was looking for the owner of the SRT4 I ran the other day. http://www.srtforums.com/forums/f31/...s-bike-638024/
EDIT: Found your mods, sounds like a helluva setup: LS2 Swap w/LS3 Pro Comp CNC ported heads and ported LS3 intake Intake, Ported 92MM Billet TB, Lt`s/catless mids/Borla 3" XS Pro mufflers, Ed Curtis custom MAX AIR cam/trunion upgrades/Lunati linkbar lifters, catch can, 25% UDP, SLP ported oil pump, SD tuned, Vararam, Hinson Polly motor mounts, weight reduction, QA1 Adjustable rear coilovers, Centerforce dual friction clutch, Gforce 1pc driveshaft, 100% Built and Tuned by me! SRA swap on hold
EDIT: Found your mods, sounds like a helluva setup: LS2 Swap w/LS3 Pro Comp CNC ported heads and ported LS3 intake Intake, Ported 92MM Billet TB, Lt`s/catless mids/Borla 3" XS Pro mufflers, Ed Curtis custom MAX AIR cam/trunion upgrades/Lunati linkbar lifters, catch can, 25% UDP, SLP ported oil pump, SD tuned, Vararam, Hinson Polly motor mounts, weight reduction, QA1 Adjustable rear coilovers, Centerforce dual friction clutch, Gforce 1pc driveshaft, 100% Built and Tuned by me! SRA swap on hold
Last edited by Sticks n Stones; 01-19-2013 at 01:56 PM.
#14
Staging Lane
what are the odds though that I literally just read that kill on there site then you post up a identical type race?
#17
Just got done MURDERING a brand new Challenger R/T lol. Vids uploading
#20
Staging Lane