460 hp termi vs 416 gto -
#1
460 hp termi vs 416 gto -
First race of the night, I just installed my injectors and switched to e85. I was having big tune problems, car was running real rich for this race along with a few * less timing. I gave him the hit, Also, I had my air leaner on for this race wich is worth a couple mph
Last edited by Cwarta; 10-27-2013 at 02:50 AM.
#6
Teching In
Good run! Looks like you were pulling though the whole race.
So, 460Hp Terminator...I am assuming it was a pulley'd & ported Heaton Cobra with some bolt-ons? Have any other specs on it?
So, 460Hp Terminator...I am assuming it was a pulley'd & ported Heaton Cobra with some bolt-ons? Have any other specs on it?
Trending Topics
#10
10 Second Club
iTrader: (8)
My mustang made 458 with a 2.93 pulley, o/r x pipe, catback and a intake. Blew up there to on hot laps. If it was a little fatter in may have lived but not made as much power. I should find out in a week or 2 what it does with the ported blower. I'm gonna want it "safe".
#15
I'm not, I made that pass and realized it needed a few changes. I made the changes an ran that gt500 then stopped. I kept a sharp eye on my A/F guage and everything looked fine there. A few logs show horrible IAT's . The cars parked untill I can get it handled.