Street Racing & Kill Stories Basic Technical Questions & Advice

This doesn't seem right??

Thread Tools
 
Search this Thread
 
Old 02-22-2017, 03:26 PM
  #41  
10 Second Club
iTrader: (8)
 
HioSSilver's Avatar
 
Join Date: Aug 2002
Location: Winchester, VA
Posts: 5,927
Received 412 Likes on 330 Posts

Default

Originally Posted by UltraZLS1
14 is new 5.3 I got one. Last year of the 6 speed auto. 15 up have a8 I think.

My friend has a 2012 4wd 2500 5.7 hemi truck. Mine is a 4wd 1500.

Be pretty close stock if I guessed. With my headers and tune and E85 in the tank now I'd win for sure. He still stock.

If his truck were a 1500 I'd have to give him the edge both stock. Just guessing.

As for the 6.2 Silverado. Different league than the 5.7. Not even close on my butt dyno anyway
I would think a8 to a8 it would be close wuth the 5.7 and 5.3.

My uncles 03 rcsb 4x4 ran like a 15.7 bonestock. We just did a set of 243s on it, 1.9 rockers, headers and i tuned it a little. Really woke it up. Put alot if tq in that little motor to.

My 2500hd ran a 16.1 stock. I did a very mild tune on it, cai, udp and it ran a 16.1.....but with heavy *** hummer wheels and 33x12.5 17s. Mods basically offset the bigger tires. But it runs pretty good from a roll. It can make much better et'ing vehicles wonder wtf once it's moving.
Originally Posted by sw07gt
In Hio world chevy never loses. Ever.
It happens from time to time. But under fair conditions they don't lose very often.
Originally Posted by JC316
Being fair, the ram isn't 100% stock. CAI and tune. The Silverado has a catback. Even still though, the Hemi dynos around 265 to the 5.3L's 245. 6.0L would have an easier time.
My uncles stock 5.3 made 239whp/259wtq. Same dyno i made 413 on years ago pre rockers and fast....same day to. To be fair here we are comparing the top ram motor to the midrange chevy to.
Old 02-22-2017, 03:36 PM
  #42  
Staging Lane
 
freaky57fast's Avatar
 
Join Date: Jul 2014
Location: Northern Michigan
Posts: 95
Likes: 0
Received 2 Likes on 2 Posts
Default

Originally Posted by HioSSilver
I would think a8 to a8 it would be close wuth the 5.7 and 5.3.

My uncles 03 rcsb 4x4 ran like a 15.7 bonestock. We just did a set of 243s on it, 1.9 rockers, headers and i tuned it a little. Really woke it up. Put alot if tq in that little motor to.

My 2500hd ran a 16.1 stock. I did a very mild tune on it, cai, udp and it ran a 16.1.....but with heavy *** hummer wheels and 33x12.5 17s. Mods basically offset the bigger tires. But it runs pretty good from a roll. It can make much better et'ing vehicles wonder wtf once it's moving.

It happens from time to time. But under fair conditions they don't lose very often.


My uncles stock 5.3 made 239whp/259wtq. Same dyno i made 413 on years ago pre rockers and fast....same day to. To be fair here we are comparing the top ram motor to the midrange chevy to.
dodge actually puts the 6.4 in the ram now so the 5.7 isn't the top of the line gas truck engine anymore.
Old 02-22-2017, 04:35 PM
  #43  
10 Second Club
iTrader: (8)
 
HioSSilver's Avatar
 
Join Date: Aug 2002
Location: Winchester, VA
Posts: 5,927
Received 412 Likes on 330 Posts

Default

They don't put it in 1500's tho.
Old 02-24-2017, 07:05 AM
  #44  
10 Second Club
iTrader: (8)
 
HioSSilver's Avatar
 
Join Date: Aug 2002
Location: Winchester, VA
Posts: 5,927
Received 412 Likes on 330 Posts

Default

Just a thought. A H.O 5.3 would likely put down around 260whp.....should be 20hp more than my uncles as my uncles is no a H.O. Although it does now have 243 heads on it and a few other goodies.
Old 02-25-2017, 02:10 AM
  #45  
TECH Apprentice
iTrader: (1)
 
JC316's Avatar
 
Join Date: Jan 2012
Posts: 367
Received 78 Likes on 57 Posts

Default

Originally Posted by HioSSilver
Just a thought. A H.O 5.3 would likely put down around 260whp.....should be 20hp more than my uncles as my uncles is no a H.O. Although it does now have 243 heads on it and a few other goodies.
Trust me man, that hemi will walk all over a 5.3L silverado, even an HO. I'd say motor vs motor, I'd give the hemi an edge over the LS equal in HP. They just put those motors in cars that are way too heavy.




Cam vs cam


Old 02-25-2017, 07:03 AM
  #46  
10 Second Club
iTrader: (8)
 
HioSSilver's Avatar
 
Join Date: Aug 2002
Location: Winchester, VA
Posts: 5,927
Received 412 Likes on 330 Posts

Default

I can youtube race them the other way if you like. It's not hard.


Even 4.8's get to have some fun vs the hemi

There's plenty more to. I'm not gonna post erry vid i can find on youtube like you did .


Best part is I've only lost to 1 hemi truck. It was cammed, headers, tune, cut out, cai and was a rcsb 1500 4x4 vs my 2500 hd ecsb 4x4. We did a 25/30 roll. I know how they run. Been there done that with out youtube.

Punch tow/haul button, shift manually at 6k......no hemi worries.

Now if you let the auto shift where it wants in the chevy truck you may lose. They shift about 5200 rpm. All you have to be is just a little smarter than the auto to win.

Last edited by HioSSilver; 02-25-2017 at 07:38 AM.
Old 02-25-2017, 01:01 PM
  #47  
Staging Lane
 
freaky57fast's Avatar
 
Join Date: Jul 2014
Location: Northern Michigan
Posts: 95
Likes: 0
Received 2 Likes on 2 Posts
Default

Originally Posted by HioSSilver
I can youtube race them the other way if you like. It's not hard.

https://youtu.be/lJt5UWEesXo

Even 4.8's get to have some fun vs the hemi
https://www.youtube.com/shared?ci=eEwTU6lyYXk

There's plenty more to. I'm not gonna post erry vid i can find on youtube like you did .


Best part is I've only lost to 1 hemi truck. It was cammed, headers, tune, cut out, cai and was a rcsb 1500 4x4 vs my 2500 hd ecsb 4x4. We did a 25/30 roll. I know how they run. Been there done that with out youtube.

Punch tow/haul button, shift manually at 6k......no hemi worries.

Now if you let the auto shift where it wants in the chevy truck you may lose. They shift about 5200 rpm. All you have to be is just a little smarter than the auto to win.
first video was an ss with a 6.0 second video says it doesn't exist...
Old 02-25-2017, 02:03 PM
  #48  
10 Second Club
iTrader: (8)
 
HioSSilver's Avatar
 
Join Date: Aug 2002
Location: Winchester, VA
Posts: 5,927
Received 412 Likes on 330 Posts

Default

Click the link in your quote.

I know the first one was a ss. So was the first one in jp post. Cwhatididthere
Old 02-25-2017, 05:28 PM
  #49  
TECH Apprentice
iTrader: (1)
 
JC316's Avatar
 
Join Date: Jan 2012
Posts: 367
Received 78 Likes on 57 Posts

Default

Originally Posted by HioSSilver
I can youtube race them the other way if you like. It's not hard.


Even 4.8's get to have some fun vs the hemi


There's plenty more to. I'm not gonna post erry vid i can find on youtube like you did .


Best part is I've only lost to 1 hemi truck. It was cammed, headers, tune, cut out, cai and was a rcsb 1500 4x4 vs my 2500 hd ecsb 4x4. We did a 25/30 roll. I know how they run. Been there done that with out youtube.

Punch tow/haul button, shift manually at 6k......no hemi worries.

Now if you let the auto shift where it wants in the chevy truck you may lose. They shift about 5200 rpm. All you have to be is just a little smarter than the auto to win.

Two videos.... Second one was probably a damned 4.7L ram. Hio, you're a compulsive liar when it comes to GM. The SS runs a 15.0@90 and a 5.7L ram runs 15.1@89.
Old 02-26-2017, 11:02 AM
  #50  
TECH Resident
iTrader: (4)
 
odthetruth's Avatar
 
Join Date: Oct 2011
Location: heading South East on Bakalakadaka street
Posts: 819
Likes: 0
Received 1 Like on 1 Post
Default

Lol hemi!
Old 02-26-2017, 11:43 AM
  #51  
TECH Fanatic
iTrader: (2)
 
Omega Doom's Avatar
 
Join Date: Dec 2006
Location: DFW,TX
Posts: 1,529
Likes: 0
Received 18 Likes on 16 Posts

Default

Originally Posted by WisT02ws6
My 02 WS6 M6 made 321 bone stock, 340 with a lid and a tune.
my bone stock 02' WS6 A4 made 327rwhp 343rwtq then I put in a Yank 4200 and long tube headers and true duals and it made 302rwhp without a tune though lol
Old 02-26-2017, 12:33 PM
  #52  
TECH Addict
 
pdxmotorhead's Avatar
 
Join Date: Oct 2016
Location: PDX-OR-USA
Posts: 2,497
Received 475 Likes on 365 Posts
Default

1968 Charger weighed about 3500 lbs.
2017 Charger weighs 3800 and up to 4500..

They done over fed them!
Old 02-26-2017, 03:05 PM
  #53  
10 Second Club
iTrader: (8)
 
HioSSilver's Avatar
 
Join Date: Aug 2002
Location: Winchester, VA
Posts: 5,927
Received 412 Likes on 330 Posts

Default

Originally Posted by JC316
Two videos.... Second one was probably a damned 4.7L ram. Hio, you're a compulsive liar when it comes to GM. The SS runs a 15.0@90 and a 5.7L ram runs 15.1@89.
I'm not a compulsive liar about ****. You simply don't know wtf you're talking about and have been exposed once again.

The liar would be your dumbass making up it was a 4.7 truck when it says it's a hemi. I bet you voted for clinton with bullshit like that.
Old 02-26-2017, 03:52 PM
  #54  
TECH Apprentice
iTrader: (1)
 
JC316's Avatar
 
Join Date: Jan 2012
Posts: 367
Received 78 Likes on 57 Posts

Default

Originally Posted by HioSSilver
I'm not a compulsive liar about ****. You simply don't know wtf you're talking about and have been exposed once again.

The liar would be your dumbass making up it was a 4.7 truck when it says it's a hemi. I bet you voted for clinton with bullshit like that.
Man, I have caught you in so many lies, I can't even keep count any more. As usual, I have a ton of video proof, track times, and personal experience to back up my claims.

As for that video, a bunch of people were calling BS on it being a hemi, the GM owner shockingly freaked out, just like you.
Old 02-26-2017, 07:13 PM
  #55  
10 Second Club
iTrader: (8)
 
HioSSilver's Avatar
 
Join Date: Aug 2002
Location: Winchester, VA
Posts: 5,927
Received 412 Likes on 330 Posts

Default

Dude you haven't caught me in ****. No matter how many times you say it it's simply not true. You're like these ****** news channels that keep making **** up about trump.

Best thing for you to do is keep making those ****** *** vids on your channel so people dumber than will comment abd like them.

Yea man....I'm sure the hemi owners were offended by getting stomped by a 4.8. Fact is there isn't a ton of difference in the way a 4.8 runs to a 5.3 unless it's a h.o. 5.3.

Your ******* personal experience is laughable.....just like your 14sec motor swapped furds. Now go jump off a cliff.
Old 02-26-2017, 07:24 PM
  #56  
7 Second Club
 
islander033's Avatar
 
Join Date: Jul 2013
Location: Crossfield, AB
Posts: 239
Received 313 Likes on 242 Posts

Default

Originally Posted by HioSSilver
Dude you haven't caught me in ****. No matter how many times you say it it's simply not true. You're like these ****** news channels that keep making **** up about trump.

Best thing for you to do is keep making those ****** *** vids on your channel so people dumber than will comment abd like them.

Yea man....I'm sure the hemi owners were offended by getting stomped by a 4.8. Fact is there isn't a ton of difference in the way a 4.8 runs to a 5.3 unless it's a h.o. 5.3.

Your ******* personal experience is laughable.....just like your 14sec motor swapped furds. Now go jump off a cliff.
Very triggered^
Old 02-26-2017, 07:35 PM
  #57  
TECH Apprentice
iTrader: (1)
 
JC316's Avatar
 
Join Date: Jan 2012
Posts: 367
Received 78 Likes on 57 Posts

Default

Originally Posted by HioSSilver
Dude you haven't caught me in ****. No matter how many times you say it it's simply not true. You're like these ****** news channels that keep making **** up about trump.

Best thing for you to do is keep making those ****** *** vids on your channel so people dumber than will comment abd like them.

Yea man....I'm sure the hemi owners were offended by getting stomped by a 4.8. Fact is there isn't a ton of difference in the way a 4.8 runs to a 5.3 unless it's a h.o. 5.3.

Your ******* personal experience is laughable.....just like your 14sec motor swapped furds. Now go jump off a cliff.
Yeah, I have. You are hands down the most delusional person that I know. Jake and Big hammer are trolls, I can respect that, but you actually believe the bullshit that you spew. Regardless of how much evidence is right in your face, you still say that GM is better.

So I have a crew cab Hemi and an extended cab 5.3L lined up, the hemi walks it like a dog and that is laughable? There are videos after videos of Hemi rams walking on 5.3L's and 6.0L's with equal or fewer mods and that is laughable? There are countless dyno sheets showing the hemi beating a comparable LS by at least 20RWP and that is laughable?

I love the LS motor, and I would take it over the hemi any day due to reliability and availability, but the hemi is the more powerful motor. That isn't opinion, that is 100% fact.

As for my youtube channel, lets let the numbers speak for themselves.

HioSSilver1999 = 33 subscribers, 28,000 views
JC316 = 1879 subscribers, 1,450,000 views.
Old 02-26-2017, 10:19 PM
  #58  
10 Second Club
iTrader: (8)
 
HioSSilver's Avatar
 
Join Date: Aug 2002
Location: Winchester, VA
Posts: 5,927
Received 412 Likes on 330 Posts

Default

HioSSilver 3700+ posts if actual information . Have to clean out muh pm's from people from time to time because it fills up

Jc123 271 posts of irrelevant bullshit. No pm's because he don't know ****

Remember. .....i have raced the hemis. My uncle has raced the hemis. My neighbor's hemi got beat by my uncles 5.3 in comparable trucks. My uncles truck made 239 whp......H.O. 5.3s make 20 more hp. Even goin by YOUR hp estimates without ever being near a ******* dyno those numbers add up to similar hp.

By YOUR experience you're to ******* stupid to shift the 5.3 manually thus proving you have no ******* clue 100% fact.

Thinking a dyno sheet is the only thing that matters when racing.....100% moron

Old 02-26-2017, 10:35 PM
  #59  
TECH Apprentice
iTrader: (1)
 
JC316's Avatar
 
Join Date: Jan 2012
Posts: 367
Received 78 Likes on 57 Posts

Default

Originally Posted by HioSSilver
HioSSilver 3700+ posts if actual information . Have to clean out muh pm's from people from time to time because it fills up

Jc123 271 posts of irrelevant bullshit. No pm's because he don't know ****

Remember. .....i have raced the hemis. My uncle has raced the hemis. My neighbor's hemi got beat by my uncles 5.3 in comparable trucks. My uncles truck made 239 whp......H.O. 5.3s make 20 more hp. Even goin by YOUR hp estimates without ever being near a ******* dyno those numbers add up to similar hp.

By YOUR experience you're to ******* stupid to shift the 5.3 manually thus proving you have no ******* clue 100% fact.

Thinking a dyno sheet is the only thing that matters when racing.....100% moron

Lol, you're so desperate to beat me at something that you have to come up with forum posts.... It's all right there slugger, you're better than me at posting on LS1tech.

I have also raced the hemi, the GM lost in my case. No, a dyno sheet doesn't matter, but all of the silverado losses that I posted above, and the silverado that lost my hemi does paint a picture. You're too blind to see it.

Oh and 5.7L hemi vs 5.7L GTO. That charger also weighs at least 200lbs more than the LS1. It's always been about the weight.

Old 02-27-2017, 07:02 AM
  #60  
10 Second Club
iTrader: (8)
 
HioSSilver's Avatar
 
Join Date: Aug 2002
Location: Winchester, VA
Posts: 5,927
Received 412 Likes on 330 Posts

Default

And if you believe that's a healthy well driven gto it shows what a idiot you are. A friend had a ls1 gto. It went 13.3 with only a cai.

Beat you?? Lol....you're beating yourself with a useless youtube channel raging fagger. I even got a pm from someone laughing at your ****.

The sad part here is you really think you know wtf you're talking about or doin. Your just like hillary cunton.....even tho you lose you still think you're right.


Quick Reply: This doesn't seem right??



All times are GMT -5. The time now is 08:06 PM.