Received my Konis today!!!
#1
On The Tree
Thread Starter
iTrader: (10)
Join Date: Oct 2009
Location: Spring, Tx
Posts: 191
Likes: 0
Received 0 Likes
on
0 Posts
Received my Konis today!!!
Well I finally received my Koni's today. I'm planning on installing them this weekend and was wondering if anyone on here is running the Koni's with stock springs and what settings they are running on the front and the rears. From what I'm been reading 4 turns from full hard on the fronts and one full turn on the rears is a good starting point.
Last edited by cajunss; 10-20-2009 at 12:49 PM.
#3
I started in the middle on the fronts(about four sweeps from hard and full soft in the rears.I have koni 4/3's so you have to adjust them off the car(rears).Who did you buy them from?If you bought them from Strano you can call him up and talk to him.
#5
Launching!
Join Date: Mar 2006
Location: Indianapolis, IN
Posts: 285
Likes: 0
Received 0 Likes
on
0 Posts
I'm on stock Z28 suspension (except have SS 32mm swaybar), and I set mine to full soft in the rear and 2 sweeps from full soft in the front. It handles great. I might try small variations on this, but happy with the way it handles now. Huge improvement over the deCarbons w/ settings noted above.
#6
On The Tree
Thread Starter
iTrader: (10)
Join Date: Oct 2009
Location: Spring, Tx
Posts: 191
Likes: 0
Received 0 Likes
on
0 Posts
I been going back and front trying to decide going with the stock springs or ordering the Strano springs. The issues is I don't want to have to worry about my exhuast hitting and also don't want a harsh ride more then it is already.