Hardest 60 foot on a stock TA?
#1
TECH Senior Member
Thread Starter
iTrader: (15)
Join Date: Nov 2001
Location: Grand Prairie, TX
Posts: 5,109
Likes: 0
Received 0 Likes
on
0 Posts
Hardest 60 foot on a stock torque arm?
Whats the most abuse your stock TorqueArm has undergone? lol
http://www.qwplayers.org/~crp/beenfetched.wmv
This is what mine goes through. My stocker does me good
http://www.qwplayers.org/~crp/beenfetched.wmv
This is what mine goes through. My stocker does me good
Last edited by V6 Bird; 04-11-2005 at 02:51 PM.
#4
TECH Senior Member
Thread Starter
iTrader: (15)
Join Date: Nov 2001
Location: Grand Prairie, TX
Posts: 5,109
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by gator's 99TA
hmmm so my 1.55 @ 3500 lbs really isnt that big of a deal lol
Mike
#6
TECH Senior Member
Thread Starter
iTrader: (15)
Join Date: Nov 2001
Location: Grand Prairie, TX
Posts: 5,109
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ls1mojo
Now that you mention it, there's not quite a few 'stock' fbodies floating around that lift the wheels like that.
Nothing unique about it at all.
Nothing unique about it at all.
Trending Topics
#8
TECH Senior Member
Thread Starter
iTrader: (15)
Join Date: Nov 2001
Location: Grand Prairie, TX
Posts: 5,109
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ls1mojo
Well then you should edit your post because that mislead you, sorry I don't know what a tq arm does or how it helps with taking off.
Mike
#11
TECH Senior Member
Thread Starter
iTrader: (15)
Join Date: Nov 2001
Location: Grand Prairie, TX
Posts: 5,109
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BADFNZ
Can anyone on this site beat a 5.43?
He's actually a buddy of mine. I told him id beat him to the tree and on the light. He didnt believe me til I did it. We laughed and drank a few beers when the race was over..lol
Mike
#16
TECH Senior Member
Thread Starter
iTrader: (15)
Join Date: Nov 2001
Location: Grand Prairie, TX
Posts: 5,109
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by mshiznitzh
Hey did you take the bump stop out or just grind it?
If you are talking about the ones I think you are, mine are cut out and plates re-welded back in their place for bracing.
Good to know BADZ...Im sure they are others who have been pretty fast on the stock ones....Where did yours break at? The rear?
Ive got it mounted on the cross member and then bolted to the Moser 9" beefy TA mount on the rear. No washers welded around the holes are nothing right now.
Mike
#18
TECH Senior Member
iTrader: (2)
Originally Posted by V6 Bird
If the car twists alot then yes it will matter..lol Ive got a Wolfe Sway bar that keeps the car from twisting on launch.
Mike
Mike
#19
Originally Posted by V6 Bird
Bump stop?
If you are talking about the ones I think you are, mine are cut out and plates re-welded back in their place for bracing.
Good to know BADZ...Im sure they are others who have been pretty fast on the stock ones....Where did yours break at? The rear?
Ive got it mounted on the cross member and then bolted to the Moser 9" beefy TA mount on the rear. No washers welded around the holes are nothing right now.
Mike
If you are talking about the ones I think you are, mine are cut out and plates re-welded back in their place for bracing.
Good to know BADZ...Im sure they are others who have been pretty fast on the stock ones....Where did yours break at? The rear?
Ive got it mounted on the cross member and then bolted to the Moser 9" beefy TA mount on the rear. No washers welded around the holes are nothing right now.
Mike
Sorry mike I was talking about the ones over the axle. Is that the ones you are taking about.
#20
11 Second Club
iTrader: (8)
Join Date: Aug 2004
Location: Montgomery, IL
Posts: 1,831
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by V6 Bird
Whats the most abuse your stock TorqueArm has undergone? lol
http://www.qwplayers.org/~crp/beenfetched.wmv
This is what mine goes through. My stocker does me good
http://www.qwplayers.org/~crp/beenfetched.wmv
This is what mine goes through. My stocker does me good