Looking for a good machine shop in the Dallas/East Texas area
#1
Looking for a good machine shop in the Dallas/East Texas area
I picked up a set of 799 heads I'm planning to put on a 4.8 I'm getting ready to swap into an '87 C10. I'm going to have them all checked out before I put them on, but I thought I might want to have some light port work done (basic bowl work and smoothing). I'm a little east of Dallas, close to Tyler, and I'm looking for a reputable machine shop in the area that can handle that and perform a performance valve job (3 angle/5 angle). I did some searching and saw several people mention RayMac as well as Lloyd Elliott and Trevor Johnson, but all the posts I found were quite old. I'm not looking for a high dollar port job, just something basic. Thanks for any help.
#4
Thanks for the response. I've heard of LRE before, and I've been planning on talking to them about another project I have going. I'll ask them about head work when I call them.