F.S. / Gauging Interest : 2000 Camaro
#1
TECH Enthusiast
Thread Starter
iTrader: (1)
Join Date: Oct 2002
Location: Houston / Pearland
Posts: 678
Likes: 0
Received 0 Likes
on
0 Posts
F.S. / Gauging Interest : 2000 Camaro
Like the title says i'm testing the water for selling my car. I don't have any pics right now but i will work on getting some up. As far as the price goes it may be high but i'm not exactly pressed to sell the car so if i can get it cool, if not oh well.
2000 Z28 $14,500
60k miles
6spd T-tops Power windows/locks
10 Spoke painted SS wheels
Red
Classic Soft Trim Leather interior
Mods:
Stock bottom end LS2 and LS2 Conversion parts (obviosly)
About 5-6000 Miles since installed. I'm not sure how many were one the motor when it was installed but not many at all because it was out of a new C6 when they first came out.
MTI Stg 2 LS6 Heads
(These are a killer set of heads they are roughly $3000 new from MTI. The added cost is from the extra work i had done on them.)
MTI S1 Cam
(Will install the cam of your choice if you want something smaller)
LS6 Intake w/ Ported TB
Hooker ceramic headers w/ off road y into a 3" cut out.
Stock catback (i wanted something quiet as possible, i also have a SLP Dual Dual that i will let go with the car or something can be worked out for the catback of your choice)
Walbro Inline
MTI Black Lid
85mm maf
Poly motor mounts
Hotchkis SFC
LCA's
Spec 3
ASP Pulley
I have a BMR k-member, upper and lower a-arms waiting to be installed that i will sell to the buyer also if interested.
The car makes 475 rwhp and 430 rwtq as it sits now through the LS6 intake. Before with the Z1 cam it make 465/430. i've been wanting to throw on a FAST 90/90 to try for the 500rwhp h/c i just haven't had the time. The heads on this car a great set especially if someone is wanting to eventually put them on a big motor car. Open up the chamber and put a set of large valves in them and there will be BIG power to be had.
If there are any parts that would like to be added with the car it can be arranged (ie. Catback, headers, cam Etc) I will be willing to sell them on the car at what the parts cost if it helps sell the car.
$14,500
Call me at MTI for any questions:
281-870-8787
2000 Z28 $14,500
60k miles
6spd T-tops Power windows/locks
10 Spoke painted SS wheels
Red
Classic Soft Trim Leather interior
Mods:
Stock bottom end LS2 and LS2 Conversion parts (obviosly)
About 5-6000 Miles since installed. I'm not sure how many were one the motor when it was installed but not many at all because it was out of a new C6 when they first came out.
MTI Stg 2 LS6 Heads
(These are a killer set of heads they are roughly $3000 new from MTI. The added cost is from the extra work i had done on them.)
MTI S1 Cam
(Will install the cam of your choice if you want something smaller)
LS6 Intake w/ Ported TB
Hooker ceramic headers w/ off road y into a 3" cut out.
Stock catback (i wanted something quiet as possible, i also have a SLP Dual Dual that i will let go with the car or something can be worked out for the catback of your choice)
Walbro Inline
MTI Black Lid
85mm maf
Poly motor mounts
Hotchkis SFC
LCA's
Spec 3
ASP Pulley
I have a BMR k-member, upper and lower a-arms waiting to be installed that i will sell to the buyer also if interested.
The car makes 475 rwhp and 430 rwtq as it sits now through the LS6 intake. Before with the Z1 cam it make 465/430. i've been wanting to throw on a FAST 90/90 to try for the 500rwhp h/c i just haven't had the time. The heads on this car a great set especially if someone is wanting to eventually put them on a big motor car. Open up the chamber and put a set of large valves in them and there will be BIG power to be had.
If there are any parts that would like to be added with the car it can be arranged (ie. Catback, headers, cam Etc) I will be willing to sell them on the car at what the parts cost if it helps sell the car.
$14,500
Call me at MTI for any questions:
281-870-8787