01 NBM SS H/C/I, 438whp, T56, UPDATED PICS & VIDEO
#1
Launching!
Thread Starter
iTrader: (8)
Join Date: Oct 2007
Posts: 229
Likes: 0
Received 0 Likes
on
0 Posts
01 NBM SS H/C/I, 438whp, T56, UPDATED PICS & VIDEO
Year: 2001
Make: Chevrolet
Model: Camaro
Price: $9500
Mileage: 106000
Private or Dealer Listing: Private Listing
Location (State): KY
Color: Blue
Transmission: Manual
Drivetrain: Rear Wheel Drive
LS Engine?: Car has LS engine
Motor-
Brand new LS6 block from gm
Forged Mahle Pistons(-4cc reliefs)
Stock rods/Crank with new bearings
EPS 234/246 111lsa
TEA Valve Springs
TEA hardened pushrods
PRC stage 1 LS6 Heads
ARP Rod Bolts
Powerbond UDP
Fuel & Air-
FAST 90 Intake
NW 90mm Throttle body
FTP 98mm Lid
Delphi 85mm Maf"
42lb Injectors
Racetronix Fuel Pump W/ Harness
Pacesetter Long tubes and Y
Magnaflow Catback
Appearance and Misc-
17x9.5 and 18x10.5 C5 Deep dish wheels
315/30/18 falken azenis
8k HID's fogs and lows
SLP SS grille
Slotted rotors and ceramic pads
full poly mounts
Monster LVL 3 Clutch
UMI SFC's
Pics and video of the outside now show the current stance the car has. 8/1
Last edited by 95civic2005; 08-12-2012 at 04:04 PM.
#5
Launching!
Thread Starter
iTrader: (8)
Join Date: Oct 2007
Posts: 229
Likes: 0
Received 0 Likes
on
0 Posts
PMs replied to! Lots of interest but no cash in hand! Updates pics to show the current stance of the car.
Also, several people have PMed about if the car still has AC and everything. Yes the car does still have AC, but needs charged, which I plan to do tomorrow. Car still has every option it came from the factory with PW, PL, power seat, etc.
Also, several people have PMed about if the car still has AC and everything. Yes the car does still have AC, but needs charged, which I plan to do tomorrow. Car still has every option it came from the factory with PW, PL, power seat, etc.
Last edited by 95civic2005; 08-01-2012 at 08:12 PM.
Trending Topics
#13
Launching!
Thread Starter
iTrader: (8)
Join Date: Oct 2007
Posts: 229
Likes: 0
Received 0 Likes
on
0 Posts
No sir, sorry! I need cash for the new project and to put back in the savings lol
Was told the forged pistons and rings were installed for spray. If I remember correct, they gapped the rings for a 150-200 shot. Went 11.2 last year on 27x11.50 Hoosier QTP street slicks and went 11.2 this year on 26x8.5 Hoosier slicks this year. Haven't raced in the best air this year tho, so it would have went 11.0-11.1 for sure this fall.
Was told the forged pistons and rings were installed for spray. If I remember correct, they gapped the rings for a 150-200 shot. Went 11.2 last year on 27x11.50 Hoosier QTP street slicks and went 11.2 this year on 26x8.5 Hoosier slicks this year. Haven't raced in the best air this year tho, so it would have went 11.0-11.1 for sure this fall.