2001 s10 ex cab 5.3
#1
Staging Lane
Thread Starter
iTrader: (9)
Join Date: Jan 2002
Location: lake ozark mo
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
2001 s10 ex cab 5.3
Year: 2001
Make: Chevrolet
Model: S-10
Price: $8500
Mileage: 0
Private or Dealer Listing: Private Listing
Location (State): MO
Color: Black
Transmission: Automatic
Drivetrain: Rear Wheel Drive
LS Engine?: Car has LS engine
truck is a 2001 zq8 ex cab, has the 8.5 rear end with new 3.73 and factory g80. and blazer disc brakes installed, transmission is a 4l60e that has been rebuilt with a few goodies in it, tci 2800 stall
engine is a 80k pullout 5.3 that has had a ls6 cam,lifters and springs and intake installed along with a valve job and good cleaning since heads were off anyways. brp ceramic coated longtube headers, custom crossmemeber that i made , has 2.5 mandrel bent exhaust, into a y with 3 inch outlet into a magnaflow 3 inch muffler and a 3 inch tail, just over rear end and cut. also has a 3 inch cat just to cut down a little flutter it had
has blazer floor shift and console and bucket seats from a 2003 s10. has 3rd door,has a 4 inch steel cowl hood
truck was painted black a few years back, has a few small scratches ,
has hidden hitch under roll pan,i hauled my tracker on a 12 ft trailer at 70 mph with no problem, has tow haul as well.
bed floor is green, never got around to rhino lining it,
is rolling on vette wagon wheels. wrapped in nitto555 front and rear, 295/45 18 in rear, 245/4517 on front, tires are 85% or better, 2 inch spindles on front, 3 inch anlged block in rear, with a set of caltracs type traction bars i bought at a swap meet
ac blows cold and truck doesnt overheat, has cpw radiator, intrepid fans
only known problems is the left upper control arm bushing has some play and also has a slight vibration from pinion angle, around 70mph ,i swapped stock wheels on it and still has vibration, ive replace the 2 piece driveshaft with a one piece from a hd chev.
has kewwood usb and hands free radio installed with a mic, , envoy chrome interior handles. all speakers have been replaced with new , , tinted windows
pw pl tilt, has cruise but dont work ,dont know y, all guages work , deleted abs, has line lock, but not wired up. air bag light is on, im positive it needs a clock spring, daughter was driving when i had no intermediate shaft hooked up
im sure im forgetting a bunch of things, if any questions feel free to call or text for pics, i will pull it from barn tomorrow and take some
573-291-4884
truck runs good, could use a tune tweak and could prob get some more out of it
asking $8500 obo
may trade, no lowballs, dont like it dont post.