Powerhouse

iTrader: (4)

Only have a couple pics right now. I'll take some better ones tomorrow.

MeanGreen

They look HUGE!

Powerhouse

iTrader: (4)

I'll have more pics and a review of them tomorrow after I get some drive-time.

raptorws6

iTrader: (1)

They look pretty good from there.

'00_Z

iTrader: (3)

Damn, those are 315's ?

shaun

they look a little narrow to me? give us some updates.

Powerhouse

iTrader: (4)

Few more pictures. As for how they hook... . I launched at 3700-4000rpm and didn't even spin! It was on a decent street, but still. I would definitely recommend these tires. Not sure on the wet traction. I won't take it far when it's raining. It is suppose to rain here this weekend, so I may take it out and see how it does.






Sit fairly flush with the fender

jmofield

look's good I work at a tire shop thats a huge supporter of toyo and ive only heard good things. I personnaly run proxy 4's and love them I can dead hook from a dig on the street cars stock but still.

waterbug1999

iTrader: (3)

Would you say they feel like a Nitto DR or a MT DR?

Powerhouse

iTrader: (4)

I couldn't tell you. This is the only drag radial i've ran. They hook, that's for sure.

Ericbigmac83

iTrader: (19)

Whats your hp and tq? m6? suspension?

Powerhouse

iTrader: (4)

My mods are:

New GM LS6 Block
Callies Forged DragonSlayer Crankshaft
Scat Forged H Beam Rods
Mahle Forged Pistons w/4 cc valve reliefs
Precision Race Componets Stage 2.5 CNC'd 5.3 heads milled to a 59 cc combustion chamber 2.02/1.575 valves
Comp Cam 239/242 dur .649"/.609" 111 LSA
Comp 7.375 Hardend push rods
GM LS7 replacement lifters
Kooks 1 3/4" x 1 7/8" stepped headers w/ off road Y-pipe and 3" Flowmaster Super 40
Lucas 42# Flowmatched injectors
Fast 90mm intake
Nick Williams 90mm Throtle body
Rollmaster Double Roller timing chain
TSP Ported LS6 oil pump
ARP Head and Main Studs (12 point)
SLP Pulley
Built by HKE
Tuned by RPM - 458 rwhp 432 rwtq

6-speed. Stock suspension.

99345hp

Doesn't look good to me. The offset on the wheels is wrong, so the wheels stick out the sides of the car.

Powerhouse

iTrader: (4)

No they don't. Just the rear where the fender bends in. It sits flush\slightly inside on the top of the fender.

Shockwave179

iTrader: (7)

Uh what...

They are probably 11 inch wheels with 315's of course they are going to stick out...

99345hp

want me to type it again?

It doesn't look good, the wheel looks to be sticking outside the car. Even if it is flush it doesn't look like it is, it looks goofey to me.

Powerhouse

iTrader: (4)

That's fine if you don't like it. I just said it sits flush from the top of the fender.

Powerhouse

iTrader: (4)

BADHAWK51

iTrader: (1)

I'm not hating but it does appear that the offset on those wheels is incorrect.

Powerhouse

iTrader: (4)

I know what you mean. But like I said, they do sit flush. In the pics, they appear to be like 2inches out of the fender. But, they are not. Look at the last pic I posted.